Automatic Digital Refractometer RX-9000i


Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze.
The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability.
The RX-9000i features both high accuracy and wide measurement range.
This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
FDA 21 CFR Part 11 Software Included in Standard Delivery.
Specifications
Model RX-9000i
Cat.No. 3278
Scale Refractive index
Brix
Measurement Range Refractive index (nD) : 1.32422 to 1.70000
Brix : 0.00 to 100.00%
(5 to 75°C ATC)
Resolution Refractive index (nD) : 0.00001
Brix : 0.01%
Temperature : 0.01°C
Measurement Accuracy (nD) ±0.00004
(nD 1.33299 to1.42009 at 10.00 to 30.00°C)
±0.00010
(For ranges other than the above)
Measurement Accuracy Brix ±0.03%
(Brix 0.00 to 50.00% at 10.00 to 30.00°C)
±0.05%
(Brix 50.01 to 95.00% at 10.00 to 30.00°C)
±0.10%
(For ranges other than the above, with Sucrose solution by MODE-1)
Repeatability (nD) ±0.00002
(nD 1.33299 to1.42009 at 10.00 to 30.00°C)
±0.00005
(For ranges other than the above)
Repeatability Brix ±0.01%
(Brix 0.00 to 50.00% at 10.00 to 30.00°C)
±0.02%
(For ranges other than the above, with Sucrose solution by MODE-1)
Temperature control range 5.00 to 75.00°C
(No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature)
Power Supply AC100V to 240V, 50/60Hz
Dimensions & Weight 37×26×14cm, 7.0kg
(Main Unit only)
Power consumption 90VA
Mode MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
Output terminals • Printer (for ATAGO digital printers)
• Computer -USB
Warranty 2 years standard (3 years with product registration) excluding touchscreen