In-line Refractometer PRM-100α


The unit measures the refraction of light generated between the prism surface and a liquid sample. The PRM-100α is upgraded from the PRM-85 in the following aspects:
• Wider than ever 0.0 to 100.00% Brix range
• Improved measurement accuracy: Brix ±0.05%, nD ±0.00010
• Two options for setting the minimum indication decimal place
• Simple two-piece construction: detection section and operation display section
• Easy-to-read color display panel.
Simply attach the unit to a piping system to monitor food or beverage production, pharmaceutical production, industrial fluid, washing devices, dilution/mixing devices, etc. Continuously monitor water content and mixing ratio with successive measurements of refractive index, Brix, or concentration.
*The prism is specially designed to prevent solid materials from collecting on the surface, even after extended periods of use.
Specifications
Model PRM-100α
Cat.No. 3574
Scale Refractive index
Brix
Temperature
Measurement item One of Refractive Index (nD), Brix (temperature compensation according to sucrose solution), concentration (%) (temperature compensation according to samples), and temperature.
Measurement Range Refractive index (nD) : 1.32000 to 1.55700
Brix : 0.00 to 100.00%
Resolution Refractive index (nD) : 0.0001 or 0.00001
Brix : 0.1 or 0.01% (by selection)
Measurement Accuracy Refractive index : ±0.00010
Brix : ±0.05%
Temperature compensation range 5 to 100゚C
(Clean-in-process (CIP) up to 130゚C for no more than 30 minutes)
Wetted parts temperature resistance 5 to 150゚C
Light source LED (D-line approximation)
Materials in contact with the solution Prism : Sapphire,
Prism stage : SUS316
O-ring : Kalrez ®
Display item Refractive Index, Brix, concentration, temperature(゚C).
High and low limit setting High and low control limits can be set with keys.
Output RS-232C, DC4 to 20mA
Output item Refractive Index (nD), Brix, concentration (%), temperature (゚C)
Display system Seven-segment LED
Alarm output Open-collector output for high- and low-limit settings (alarm output).
Cable Detection section - Display section (power supply 12V and RS-485)
Length: standard 15m (maximum up to 200m)
Power Supply AC 100 to 240V, 50 / 60Hz
International Protection Class Detection section IP67, Calculation Display section IP67
Included Accessories Detection section - display section connecting cable (Standard 15m)
Recorder output cable (4-20mA) (Standard 10m)
Clamp band (for use in mounting a sample inlet unit)
O-ring (for use in mounting a sample inlet unit)
Dimensions & Weight Detection section : 10.8 x 26.6 x 10.8cm, 3.3kg
Calculation Display section : 19.2 x 10 x 24cm, 3.3kg
Power consumption 30VA
Configuration environment 5 to 40゚C, 30 to 90%RH
Pressure resistance 0.98MPa (Detection section)