Gfl Water Still - Double Distillation Water Still 2104


Specifications and features        

  • Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.
  • Very good distillate quality; conductivity:
  • single distillate: approx. 2.2 µs/cm at 25 °C
  • double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details").
  • Electronic level control during the whole distilling process.
  • Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator 1st stage, the red pilot lamp "Clean" will glow.
  • Double-action low water cut-off through float switch and thermostatic safety switch.
  • Economical energy consumption by distillation of the heated cooling water.
  • Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.
  • Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of borosilicate glass.
  • Evaporator easily accessible for cleaning purposes.
  • Distillate withdrawal: valve made of borosilicate glass with teflon plunger for single distillate, outlet with dust shield made of borosilicate glass for double distillate.
  • CO2 degassing through outlet in the condenser.
  • Heating element and evaporator made of stainless steel.
  • Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.
  • Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).
    Main switch with pilot lamp for the monitoring of both distillation stages at the front of the unit.
  • Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).
  • Hoses for water in- and outlet are available as accessory. 

Applications 
      
GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too.

Technical details
Capacity
4 l / h
Conductivity
Single distillate:
approx. 2.2 µs / cm at 20 °C
Double distillate:
approx. 1.6 µs / cm at 20 °C *
Cooling water required
approx. 120 l / h
Minimum water pressure
3 bar to max. 7 bar
Exterior dimensions
(W x D x H)
550 x 280 x 570 mm
Electrical connection
400 V / 50...60 Hz / 6.5
3 Ph/N/PE three-phase current **
Net weight
approx. 23.0 kgs
Gross weight
(cardboard box)
approx. 35.0 kgs
Gross weight
(wooden case)
approx. 45.0 kgs
Packing volume
approx. 0.34 m3
* Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.