LEAD FLUID

Basic Speed –Variable Peristaltic Pump

BQ50S Micrometeor Speed

» Product introduction BQ50S Micrometeror Speed –Variable Peristaltic Pump can work on the desktop without any fixed plate, meanwhile, embedded design makes the pump can assort with other equipments conveniently .Its flow range is 0.005-20ml/min,Speed range is 0.1-50rpm.Having basic functions such as reversible direction, start/stop, full speed (fast cleaning, empty) and speed- variable. Dispensing function realizes the repeat timing quantitative dispensing. The pump head loads Pharmed BPT tubing whose working life is up to 12000 hours under continuously running. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Simple operation, small size, easy installation, suitable for ancillary equipment and laboratories. * Built-in Pharmed BPT tubing whose working life is up to 12000 hours under continuously running * Four-figure digital LED indicator displays working speed. * The LED indicator displays the internal, external control mode. * Mask keypad operation. * Reversible direction, start/stop, adjust speed and full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing. * Speed resolution is 0.1rpm. * Plastic housing, adopts embedded design, also can work on the desktop separately. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator. * Can input the electrical level 5V,12V or 24V. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.005-20ml/min * Flow accuracy:<0.5% * Speed range:0.1-50rpm. * Speed resolution :0.1rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<8W * External control:Input electrical level 5V,12V(standard),24V(optional). * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)112mmx 96mmx96mm * Weight:0.7KG

BQ80S Micrometeor Speed

» Product introduction BQ80S Micrometeror Speed –Variable Peristaltic Pump can work on the desktop without any fixed plate, meanwhile, embedded design makes the pump can assort with other equipments conveniently .Its flow range is 0.005-32ml/min,Speed range is 0.1-80rpm.Having basic functions such as reversible direction, start/stop, full speed (fast cleaning, empty) and speed- variable. Dispensing function realizes the repeat timing quantitative dispensing. The pump head loads Pharmed BPT tubing whose working life is up to 12000 hours under continuously running. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Simple operation, small size, easy installation, suitable for ancillary equipment and laboratories. * Built-in Pharmed BPT tubing whose working life is up to 12000 hours under continuously running * Four-figure digital LED indicator displays working speed. * The LED indicator displays the internal, external control mode. * Mask keypad operation. * Reversible direction, start/stop, adjust speed and full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing. * Speed resolution is 0.1rpm. * Plastic housing, adopts embedded design, also can work on the desktop separately. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator. * Can input the electrical level 5V,12V or 24V. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters Technical parameters: * Flow range :0.005-32ml/min * Flow accuracy:<0.5% * Speed range:0.1-80rpm. * Speed resolution :0.1rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<10W * External control:Input electrical level 5V,12V(standard),24V(optional). * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)112mmx 96mmx96mm * Weight:0.8KG

BT50S Micrometeror Speed

» Product introduction BT50S Micrometeror Speed –Variable Peristaltic Pump flow range is 0.00011-190ml/min. Rotate speed is 0.1-50rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC . » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid . * Speed resolution is 0.1rpm. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid, alkali, sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.00011-190ml/min * Flow accuracy:<0.5% * Speed range:0.1-50rpm. * Speed resolution :0.1rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<25W * External control:Input electrical level 5V,12V(standard),24V(optional). * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)218mmx127mmx122mm * Weight:2.6KG

BT102S Micrometeror Speed

» Product introduction BT102S Micrometeror Speed –Variable Peristaltic Pump flow range is 0.00011-380ml/min. Rotate speed is 0.1-100rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid. * Speed resolution is 0.1rpm. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid, alkali, sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.00011-380ml/min * Flow accuracy:<0.5% * Speed range:0.1-100rpm. * Speed resolution :0.1rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<30W * External control:Input electrical level 5V,12V(standard),24V(optional). * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)218mmx 127mmx122mm * Weight:2.7KG

BT100S Basic Speed

» Product introduction BT100S Basic Speed –Variable Peristaltic Pump flow range is 0.00011-575ml/min. Rotate speed is 0.1-150rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC . » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid. * 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-150 rpm, the speed resolution is 1 rpm. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid, alkali, sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.00011-575ml/min * Flow accuracy:<0.5% * Speed range:0.1-150rpm. * Speed resolution: 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-150 rpm, the speed resolution is 1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<40W * External control:Input electrical level 5V, 12V (standard),24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, upport the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)223mmx150mmx195mm * Weight:4.7KG

BT100S -1 Basic Speed

» Product introduction BT100S-1 Basic Speed –Variable Peristaltic Pump flow range is 0.00011-1500ml/min. Rotate speed is 0.1-150rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid. * 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-150 rpm, the speed resolution is 1 rpm. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid, alkali, sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, »Technical parameters * Flow range :0.00011-1500ml/min * Flow accuracy:<0.5% * Speed range:0.1-150rpm. * Speed resolution: 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-150 rpm, the speed resolution is 1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<40W * External control:Input electrical level 5V, 12V (standard),24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)285mmx150mmx195mm * Weight:6.5KG

BT101S Basic Speed

» Product introduction BT101S Basic Speed –Variable Peristaltic Pump flow range is 0.00011-575ml/min. Rotate speed is 0.1-150rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC . » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid. * 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-150 rpm, the speed resolution is 1 rpm. * ABS plastic housing, patent protection, creative streamlined appearance, beautiful and practical. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.00011-575ml/min * Flow accuracy:<0.5% * Speed range:0.1-150rpm. * Speed resolution: 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-150 rpm, the speed resolution is 1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<30W * External control:Input electrical level 5V, 12V (standard),24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)260mmx181mmx198mm * Weight:4.5KG

BT300S Basic Speed

» Product introduction BT300S Basic Speed –Variable Peristaltic Pump flow range is 0.006-1340ml/min. Rotate speed is 0.1-350rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid. * 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-350 rpm, the speed resolution is 1 rpm. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid, alkali, sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.006-1340ml/min * Flow accuracy:<0.5% * Speed range:0.1-350rpm. * Speed resolution: 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-350 rpm, the speed resolution is 1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<50W * External control:Input electrical level 5V, 2V (standard), 24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)223mmx150mmx195mm * Weight:4.9KG

BT301S Basic Speed

» Product introduction BT301S Basic Speed –Variable Peristaltic Pump flow range is 0.006-1340ml/min. Rotate speed is 0.1-350rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC . » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid. * 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-350 rpm, the speed resolution is 1 rpm. * ABS plastic housing, patent protection, creative streamlined appearance, beautiful and practical. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.006-1340ml/min * Flow accuracy:<0.5% * Speed range:0.1-350rpm. * Speed resolution: 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-350 rpm, the speed resolution is 1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<40W * External control:Input electrical level 5V, 12V (standard),24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)260mmx181mmx198mm * Weight:4.7KG

BT600S Basic Speed

» Product introduction BT600S Basic Speed –Variable Peristaltic Pump flow range is 0.006-2300ml/min. Rotate speed is 0.1-350rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC . » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid. * 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-600 rpm, the speed resolution is 1 rpm. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid, alkali, sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.006-2300ml/min * Flow accuracy:<0.5% * Speed range:0.1-600rpm. * Speed resolution: 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-600rpm, the speed resolution is 1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<60W * External control:Input electrical level 5V, 1 2V (standard), 24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)223mmx150mmx195mm * Weight:5.2KG

WT300S Basic Speed

» Product introduction This pump adopts DC brushless motor drive which is large torque, free maintenance, can cascade four pump heads .Has basic functions such as reversible direction, start/stop, full speed (fast cleaning) and adjust speed. Control the start/stop, reversible direction, adjusts the speed via external analog quality, and adds the time dispensing function.RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machines interface and PLC. » Function and Feature * Four-figure digital LED indicator display working speed. * The LED indicator displays the internal, external control, footswitch etc working modes. * Mask keypad operation. * Reversible direction, start/stop, adjust speed and full speed, state memory (power –down memory). * Easy dispensing functions, it realizes the repeat timing quantitative dispensing liquid * Can drive multi-channels and various types of pump heads. * Speed resolution is 1rpm, speed range is 30-350rpm, flow accuracy is 3%. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid ,alkali ,sodium and the organic solvents. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high –low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface ,MODBUS protocol is available ,easy to connect with other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :1.8-3500ml/min * Flow accuracy:<3% * Speed range:30-350rpm. * Speed resolution :1rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<200W * External control:Input electrical level 5V,12V(standard),24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)286mmx180mmx230mm * Weight:6.2KG

BT601S Basic Speed

» Product introduction BT601S Basic Speed –Variable Peristaltic Pump flow range is 0.006-2300ml/min. Rotate speed is 0.1-600rpm.With basic functions such as reversible direction, start/stop, full speed (fast cleaning), adjust speed .Dispensing function can realize the repeat timing quantitative dispensing liquid .RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer ,human machine interface and PLC . » Function and Feature * Four-figure digital LED indicator displays working speed. * LED indicator displays the internal control, external control, footswitch and other working mode. * Mask keypad operation. * Reversible direction, start/stop, full speed, state memory (power-down memory). * Easy dispensing function, it realizes the repeat timing quantitative dispensing liquid. * 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-600 rpm, the speed resolution is 1 rpm. * ABS plastic housing, patent protection, creative streamlined appearance, beautiful and practical. * Can drive multi-channels and various types of pump heads. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range :0.006-2300ml/min * Flow accuracy:<0.5% * Speed range:0.1-600rpm. * Speed resolution: 0.1-100 rpm, the speed resolution is 0.1 rpm. 100-600 rpm, the speed resolution is 1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<50W * External control:Input electrical level 5V, 12V (standard),24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)260mmx181mmx198mm * Weight:4.9KG

WT600S Basic Speed

» Product introduction This pump adopts DC brushless motor drive which is large torque, free maintenance, can cascade four pump heads .Has basic functions such as reversible direction, start/stop, full speed (fast cleaning) and adjust speed. Control the start/stop, reversible direction, adjusts the speed via external analog quality, and adds the time dispensing function.RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machines interface and PLC. » Function and Feature * Four-figure digital LED indicator display working speed. * The LED indicator displays the internal, external control, footswitch etc working modes. * Mask keypad operation. * Reversible direction, start/stop, adjust speed and full speed, state memory (power –down memory). * Easy dispensing functions, it realizes the repeat timing quantitative dispensing liquid * Can drive multi-channels and various types of pump heads. * Speed resolution is 1rpm, speed range is 30-600rpm, flow accuracy is 3%. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid ,alkali ,sodium and the organic solvents. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high –low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface ,MODBUS protocol is available ,easy to connect with other equipments. * Optional footswitch or timer for dispensing fluid. »Technical parameters * Flow range :1.8-6000ml/min * Flow accuracy:<3% * Speed range:30-600rpm. * Speed resolution :1rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<200W * External control:Input electrical level 5V,12V(standard),24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP631 * Dimensions(LxWxH)286mmx180mmx230mm * Weight:6.2KG

WT600S-65 Basic Speed

» Product introduction This pump adopts DC brushless motor drive which is large torque, free maintenance, can cascade four pump heads .Has basic functions such as reversible direction, start/stop, full speed (fast cleaning) and adjust speed. Control the start/stop, reversible direction, adjusts the speed via external analog quality, and adds the time dispensing function.RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machines interface and PLC. » Function and Feature * Four-figure digital LED indicator display working speed. * The LED indicator displays the internal, external control, footswitch etc working modes. * Mask keypad operation. * Reversible direction, start/stop, adjust speed and full speed, state memory (power –down memory). * Easy dispensing functions, it realizes the repeat timing quantitative dispensing liquid * Can drive multi-channels and various types of pump heads. * Speed resolution is 1rpm, speed range is 30-600rpm, flow accuracy is 3%. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid ,alkali ,sodium and the organic solvents. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * External high –low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface ,MODBUS protocol is available ,easy to connect with other equipments. * Optional footswitch or timer for dispensing fluid. * The IP grade is IP65. The housing adopts full seal design, suitable for more harsh environment application, such as high humidity or water sputtering place. » Technical parameters * Flow range :1.8-6000ml/min * Flow accuracy:<3% * Speed range:30-600rpm. * Speed resolution :1rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), AC 110V±10%,50Hz/60Hz(optional) * Power consumption:<200W * External control:Input electrical level 5V,12V(standard),24V(optional). External control analog 0-5V(standard),0-10V,4-20mA(optional) * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP65 * Dimensions(LxWxH)286mmx180mmx230mm * Weight:6.2KG

Intelligent Flow Peristaltic Pump

BT100L

» Product introduction BT100L Intelligent peristaltic pump flow range: 0.00011-575 ml/min. It adopts color LCD displaying and touch screen technology. Easy operation interface is intuitive and clear. This pump is mainly applicable to the accurate transmission control;It also display, control flow rate and accumulate dispensing volume as the users requirements. Meanwhile, it realizes repeated timing quantitative transmission. Suitable for precise metering and dosing, highest precision can amount to 0.5%, in order to reduce unnecessary peristaltic pump noise, it adopts the intelligent temperature control technology. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is above 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating Flow function. * Easy dispensing function, it realizes the repeat timing quantitative dispensing, without the time controller. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT100L * Flow range(mL/min): 0.00011-575 * Speed range(rpm): 0.1-150 * Speed resolution(rpm): 0.1rpm * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50/60Hz(standard); AC110± 10% 50Hz/60Hz(optional). * Power consumption: <40W * External control: Input level 5V,12V(standard),24V(optional) External control analog0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition; Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 223x150x195(mm) * Weight: 4.7kg

BT101L

» Product introduction BT101L Intelligent peristaltic pump flow range: 0.00011-575 ml/min. It adopts color LCD displaying and touch screen technology. Easy operation interface is intuitive and clear.This pump is mainly applicable to the accurate transmission control. Display and control flow rate, accumulate dispensing volume realizes the users requirements.meanwhile, it also realizes repeated timing quantitative transmission. Suitable for precise metering and dosing, precision highest can amount to 0.5%, in order to reduce unnecessary peristaltic pump noise, it adopts the intelligent temperature control technology. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is above 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating Flow function. * Easy dispensing function, it realizes the repeat timing quantitative dispensing, without the time controller. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * ABS plastic housing, creative streamlined appearance. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT101L * Flow range(mL/min): 0.00011-575 * Speed range(rpm): 0.1-150 * Speed resolution(rpm): 0.1rpm * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50/60Hz(standard); AC110± 10% 50Hz/60Hz(optional). * Power consumption: <30W * External control: Input level 5V,12V(standard),24V(optional) External control analog0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition; Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 225x181x198(mm) * Weight: 4.5kg

BT300L

» Product introduction BT300L Intelligent flow peristaltic pump flow range: 0.006-1340ml/min. It adopts color LCD displaying and touch screen technology. Easy operation interface is intuitive and clear. This pump is mainly applicable to the accurate transmission control;It also display, control flow rate and accumulate dispensing volume as the users requirements. Meanwhile, it realizes repeated timing quantitative transmission. Suitable for precise metering and dosing, highest precision can amount to 0.5%, in order to reduce unnecessary peristaltic pump noise, it adopts the intelligent temperature control technology. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is above 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating Flow function. * Easy dispensing function, it realizes the repeat timing quantitative dispensing, without the time controller. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT300L * Flow range(mL/min): 0.006-1340 * Speed range(rpm): 0.1-350 * Speed resolution(rpm): 0.1rpm * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50/60Hz(standard); AC110± 10% 50Hz/60Hz(optional). * Power consumption: <50W * External control: Input level 5V,12V(standard),24V(optional) External control analog0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 223x150x195(mm) * Weight: 4.7kg

BT301L

» Product introduction BT301L Intelligent peristaltic pump flow range: 0.006-1340 ml/min. It adopts color LCD displaying and touch screen technology. Easy operation interface is intuitive and clear. This pump is mainly applicable to the accurate transmission control;It also display, control flow rate and accumulate dispensing volume as the users requirements. Meanwhile, it realizes repeated timing quantitative transmission. Suitable for precise metering and dosing, highest precision can amount to 0.5%, in order to reduce unnecessary peristaltic pump noise, it adopts the intelligent temperature control technology. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is above 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating Flow function. * Easy dispensing function, it realizes the repeat timing quantitative dispensing, without the time controller. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * ABS plastic housing, creative streamlined appearance. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT301L * Flow range(mL/min): 0.006-1340 * Speed range(rpm): 0.1-350 * Speed resolution(rpm): 0.1 rpm * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz(standard ) ; AC110± 10% 50 Hz /60Hz(optional) * Power consumption: <40W * External control: Input level 5V,12V(standard),24V(optional) External control analog0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 255x181x198(mm) * Weight: 4.7kg

BT600L

» Product introduction BT600L Intelligent peristaltic pump flow range:0.006-2300 ml/min. It adopts color LCD displaying and touch screen technology. Easy operation interface is intuitive and clear. This pump is mainly applicable to the accurate transmission control;It also display, control flow rate and accumulate dispensing volume as the users requirements. Meanwhile, it realizes repeated timing quantitative transmission. Suitable for precise metering and dosing, highest precision can amount to 0.5%, in order to reduce unnecessary peristaltic pump noise, it adopts the intelligent temperature control technology. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is above 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating Flow function. * Easy dispensing function, it realizes the repeat timing quantitative dispensing, without the time controller. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * ABS plastic housing, creative streamlined appearance. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT600L * Flow range(mL/min): 0.006-2300 * Speed range(rpm): 0.1-600 * Speed resolution(rpm): 0.1rpm * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50/60Hz(standard); AC110± 10% 50Hz/60Hz(optional). * Power consumption: <60W * External control: Input level 5V,12V(standard),24V(optional) External control analog0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition : Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 223x150x195(mm) * Weight: 5.2kg

BT601L

» Product introduction BT601L Intelligent peristaltic pump flow range: 0.006-2300 ml/min. It adopts color LCD displaying and touch screen technology. Easy operation interface is intuitive and clear. This pump is mainly applicable to the accurate transmission control;It also display, control flow rate and accumulate dispensing volume as the users requirements. Meanwhile, it realizes repeated timing quantitative transmission. Suitable for precise metering and dosing, highest precision can amount to 0.5%, in order to reduce unnecessary peristaltic pump noise, it adopts the intelligent temperature control technology. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is above 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating Flow function. * Easy dispensing function, it realizes the repeat timing quantitative dispensing, without the time controller. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * ABS plastic housing, creative streamlined appearance. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT601L * Flow range(mL/min): 0.006-2300 * Speed range(rpm): 0.1-600 * Speed resolution(rpm): 0.1 rpm * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz(standard ) ; AC110± 10% 50 Hz /60Hz(optional) * Power consumption: <50W * External control : Input level 5V,12V(standard),24V(optional) External control analog0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 255x181x198(mm) * Weight: 4.9kg

Intelligent Dispensing Peristaltic Pump

BT100F

» Product introduction BT100F Intelligent dispensing peristaltic pump flow range: 0.00011-575ml/min. It adopts color LCD touch screen with intuitive and clear displaying interface, easy to operate. Mainly used for accurate measurement and distribution of fluid. If need high accuracy when dispensing, volume dispensing mode is available; if need high producing efficiency, time dispensing mode is more convenient; if want to separate fluid to number of equal parts, copy dispensing mode would be best. When working on flow mode, it is as same as intelligent flow peristaltic pump. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Three types of distributing mode: time dispensing mode; volume dispensing mode; copy dispensing mode. * Automatically store five groups of working parameters. * Precious controlling technology for motor’s rotating angle increases the dispensing accuracy comparing to traditional time dispensing mode. * Remote infrared controlling function. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating flow function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT100F * Flow range(mL/min): 0.00011-575 * Speed range(rpm): 0.1-150 * Speed resolution(rpm): 0.1 * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz (standard ) ; AC110± 10% 50Hz/60Hz (optional) * Power consumption: <40W <50W * External control: Input level 5V,12V(standard),24V(optional) External control analog 0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 223x150x195(mm) * Weight: 4.7kg

BT100F-1

» Product introduction BT100F-1 Intelligent dispensing peristaltic pump flow range is 0.00011-1700ml/min.It adopts color LCD touch screen with intuitive and clear displaying interface. Four working model:volume dispensing,time dispensing,copy dispensing are suitable for different working requirements. Large torque output,with more pump head combination to use. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. Stainless steel housing easy to clean ,corrosion resistant. » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Four types of working mode: Flow rate mode;Volume dispensing mode;Time dispensing mode; Copy dispensing mode are available. * Three dispensing mode store five groups of working parameters automatically. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Display and control flow rate, accumulate dispensing volume. * Speed resolution is 0.1rpm. * Expert guide calibration flow function. * Remote infrared controlling function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Large torque output ,can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range(mL/min): 0.00011-1700 mL/min; * Speed range(rpm): 0.1-150 rpm/min; * Speed resolution(rpm):0.1rpm; * Flow accuracy:<0.5% * Power supply:AC 180-264V 50Hz/60Hz(standard);AC 90-132V 50Hz/60Hz(optional); * Power consumption:<60W; * External control:Input level 5V、12V(standard)、24V(optional);External control analog 0-5V(standard),0-10V,4-20mA(optional); * Communication interface:RS485 communication interface,MODBUS protocol is available; * Operating condition:0 ~ 40℃ ; * Relative humidity:<80%; * IP grade:IP31; * Dimensions(LxWxH):285mm×250mm×195mm; * Weight: 6.5kg

BT101F

» Product introduction BT101F Intelligent dispensing peristaltic pump flow range is 0.00011-575ml/min. It adopts color LCD touch screen with intuitive and clear displaying interface, easy to operate. Mainly used for accurate measurement and distribution of fluid. If need high accuracy when dispensing, volume dispensing mode is available; if need high producing efficiency, time dispensing mode is more convenient; if want to separate fluid to number of equal parts, copy dispensing mode would be best. When working on flow mode, it is as same as intelligent flow peristaltic pump. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Three types of distributing mode: time dispensing mode; volume dispensing mode ; copy dispensing mode. * Automatically store five groups of working parameters. * Precious controlling technology for motor’s rotating angle increases the dispensing accuracy comparing to traditional time dispensing mode. * Remote infrared controlling function. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating flow function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * ABS plastic housing, creative streamlined appearance. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT101F * Flow range(mL/min): 0.00011-575 * Speed range(rpm): 0.1-150 * Speed resolution(rpm): 0.1 * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz(standard ) ; AC110± 10% 50 Hz/60Hz(optional) * Power consumption: <30W * External control: Input level 5V,12V(standard),24V(optional) External control analog 0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 223x150x195(mm) * Weight: 4.5kg

BT300F

» Product introduction BT300F Intelligent dispensing peristaltic pump flow range:0.006-1340ml/min.It adopts color LCD touch screen with intuitive and clear displaying interface, easy to operate. Mainly used for accurate measurement and distribution of fluid. If need high accuracy when dispensing, volume dispensing mode is available; if need high producing efficiency, time dispensing mode is more convenient; if want to separate fluid to number of equal parts, copy dispensing mode would be best. When working on flow mode, it is as same as intelligent flow peristaltic pump. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Three types of distributing mode: time dispensing mode; volume dispensing mode ; copy dispensing mode. * Automatically store five groups of working parameters. * Precious controlling technology for motor’s rotating angle increases the dispensing accuracy comparing to traditional time dispensing mode. * Remote infrared controlling function. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating flow function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT300F * Flow range(mL/min): 0.006-1340 * Speed range(rpm): 0.1-350 * Speed resolution(rpm): 0.1 * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz (standard ) ; AC110± 10% 50Hz/60Hz (optional) * Power consumption: <50W * External control: Input level 5V,12V(standard),24V(optional) External control analog 0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 223x150x195(mm) * Weight: 4.9kg

BT301F

» Product introduction BT301F Intelligent dispensing peristaltic pump flow range is 0.006-1340ml/min. It adopts color LCD touch screen with intuitive and clear displaying interface, easy to operate. Mainly used for accurate measurement and distribution of fluid. If need high accuracy when dispensing, volume dispensing mode is available; if need high producing efficiency, time dispensing mode is more convenient; if want to separate fluid to number of equal parts, copy dispensing mode would be best. When working on flow mode, it is as same as intelligent flow peristaltic pump. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Three types of distributing mode: time dispensing mode; volume dispensing mode ; copy dispensing mode. * Automatically store five groups of working parameters. * Precious controlling technology for motor’s rotating angle increases the dispensing accuracy comparing to traditional time dispensing mode. * Remote infrared controlling function. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating flow function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * ABS plastic housing, creative streamlined appearance. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT301F * Flow range(mL/min): 0.006-1340 * Speed range(rpm): 0.1-350 * Speed resolution(rpm): 0.1 * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz(standard ) ; AC110± 10% 50 Hz/60Hz(optional) * Power consumption: <40W * External control: Input level 5V,12V(standard),24V(optional) External control analog 0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 223x150x195(mm) * Weight: 4.7kg

WT300F

» Product introduction WT300Fintelligent dispensing peristaltic pump flow rate is 0.06-4000ml/min. It adopts color LCD touch screen with intuitive and clear displaying interface. Four working model:Flow rate mode;Volume dispensing mode;Time dispensing mode; Copy dispensing mode are suitable for different working requirements. Brushless servo motor drive with large torque,no maintenance. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. Stainless steel housing easy to clean ,corrosion resistant. »Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Four types of working mode: Flow rate mode;Volume dispensing mode;Time dispensing mode; Copy dispensing mode are available. * Three dispensing mode store five groups of working parameters automatically. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Display and control flow rate, accumulate dispensing volume . * Speed resolution is 0.1rpm. * Brushless servo motor drive with large torque,no maintenance, high rotating accuracy. * Calibrating flow function. * Remote infrared controlling function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range(mL/min): 0.06-4000 mL/min; * Speed range(rpm): 0.1-350 rpm/min; * Speed resolution(rpm):0.1rpm; * Flow accuracy:<0.5% * Power supply:AC 180-264V 50Hz/60Hz(standard);AC 90-132V 50Hz/60Hz(optional); * Power consumption:<100W; * External control:Input level 5V、12V(standard)、24V(optional);External control analog 0-5V(standard),0-10V,4-20mA(optional); * Communication interface:RS485 communication interface,MODBUS protocol is available; * Operating condition:0 ~ 40℃ ; * Relative humidity:<80%; * IP grade:IP31; * Dimensions(LxWxH):286mm×180mm×230mm; * Weight: 6.2kg;

BT600F

»Product introduction BT600F Intelligent dispensing peristaltic pump flow range:0.006-2300ml/min.The pump adopts color LCD touch screen with intuitive and clear displaying interface, easy to operate. Mainly used for accurate measurement and distribution of fluid. If need high accuracy when dispensing, volume dispensing mode is available; if need high producing efficiency, time dispensing mode is more convenient; if want to separate fluid to number of equal parts, copy dispensing mode would be best. When working on flow mode, it is as same as intelligent flow peristaltic pump. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Three types of distributing mode: time dispensing mode; volume dispensing mode ; copy dispensing mode. * Automatically store five groups of working parameters. * Precious controlling technology for motor’s rotating angle increases the dispensing accuracy comparing to traditional time dispensing mode. * Remote infrared controlling function. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating flow function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Technical parameters: BT600F * Flow range(mL/min): 0.006-2300 * Speed range(rpm): 0.1-600 * Speed resolution(rpm): 0.1 * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz (standard ) ; AC110± 10% 50Hz/60Hz (optional) * Power consumption: <60W * External control: Input level 5V,12V(standard),24V(optional) External control analog 0-5v(standard),0-10v,4-20mA(optional) * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 223x150x195(mm) * Weight: 5.2kg

BT601F

» Product introduction BT601F Intelligent dispensing peristaltic pump flow range:0.006-2300ml/min.The pump adopts color LCD touch screen with intuitive and clear displaying interface, easy to operate. Mainly used for accurate measurement and distribution of fluid. If need high accuracy when dispensing, volume dispensing mode is available; if need high producing efficiency, time dispensing mode is more convenient; if want to separate fluid to number of equal parts, copy dispensing mode would be best. When working on flow mode, it is as same as intelligent flow peristaltic pump. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Three types of distributing mode: time dispensing mode; volume dispensing mode ; copy dispensing mode. * Automatically store five groups of working parameters. * Precious controlling technology for motor’s rotating angle increases the dispensing accuracy comparing to traditional time dispensing mode. * Remote infrared controlling function. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution is 0.1rpm. * Display and control flow rate, accumulate dispensing volume automatically. * Calibrating flow function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * ABS plastic housing, creative streamlined appearance. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters Technical parameters: BT601F Flow range(mL/min): 0.006-2300 Speed range(rpm): 0.1-600 Speed resolution(rpm): 0.1 Flow accuracy: <0.5% Power supply: AC220V ± 10% 50Hz/60Hz(standard ) ; AC110± 10% 50 Hz/60Hz(optional) Power consumption: <50W External control: Input level 5V,12V(standard),24V(optional) External control analog 0-5v(standard),0-10v,4-20mA(optional) Communication interface: RS485 communication interface, MODBUS protocol is available. Operating condition: Temperature 0 ~ 40°C; Relative humidity <80% IP grade: IP31 Dimensions(LxWxH): 223x150x195(mm) Weight: 4.9kg

WT600F

» Product introduction WT600Fintelligent dispensing peristaltic pump flow range is 0.06-6000ml/min.It adopts color LCD touch screen with intuitive and clear displaying interface. Four working model:Flow rate mode;Volume dispensing mode;Time dispensing mode; Copy dispensing mode are suitable for different working requirements. Brushless servo motor drive with large torque,no maintenance. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. Stainless steel housing easy to clean ,corrosion resistant. » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Three types of distributing mode: time dispensing mode; volume dispensing mode; copy dispensing mode are available. * Three dispensing mode store five groups of working parameters automatically. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Display and control flow rate, accumulate dispensing volume. * Speed resolution is 0.1rpm. * Brushless servo motor drive with large torque,no maintenance, high rotating accuracy. * Calibrating flow function. * Remote infrared controlling function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range(mL/min): 0.06-6000 mL/min; * Speed range(rpm): 0.1-600 rpm/min; * Speed resolution(rpm):0.1rpm; * Flow accuracy:<0.5% * Power supply:AC 180-264V 50Hz/60Hz(standard);AC 90-132V 50Hz/60Hz(optional); * Power consumption:<200W; * External control:Input level 5V、12V(standard)、24V(optional);External control analog 0-5V(standard),0-10V,4-20mA(optional); * Communication interface:RS485 communication interface,MODBUS protocol is available; * Operating condition:0 ~ 40℃ ; * Relative humidity:<80%; * IP grade:IP31; * Dimensions(LxWxH):286mm×180mm×230mm; * Weight: 6.2kg;

WT600F-65

» Product introduction WT600F-65 intelligent dispensing peristaltic pump adopted color LCD touch screen with intuitive and clear displaying interface. Four working model:volume dispensing,time dispensing,copy dispensing are suitable for different working requirements. Brushless servo motor drive with large torque,no maintenance. The pump adopts intelligent temperature-control technology to reduce working noise. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. Stainless steel housing easy to clean ,corrosion resistant » Function and Feature * Color LCD displaying, touch screen and keypad for operating. * Four types of working mode: Flow rate mode;Volume dispensing mode;Time dispensing mode; Copy dispensing mode are available. * Three dispensing mode store five groups of working parameters automatically. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Display and control flow rate, accumulate dispensing volume. * Speed resolution is 0.1rpm. * Brushless servo motor drive with large torque,no maintenance, high rotating accuracy. * Calibrating flow function. * Remote infrared controlling function. * The operating expert system guides users setting parameters correctly. * Intelligent temperature-control technology reduces working noise. * External high-low electrical level controls the start/stop、reversible direction and easy dispensing function, optically coupled isolator; External analog adjusts the rotate speed. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. * Internal double-deck isolation structure; circuit board with conformal coating makes it dust-proof and moisture-proof. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Can drive multi-channels and various types of pump heads. * Optional footswitch or timer for dispensing fluid. » Technical parameters * Flow range(mL/min): 0.06-6000 mL/min; * Speed range(rpm): 0.1-600 rpm/min; * Speed resolution(rpm):0.1rpm; * Flow accuracy:<0.5% * Power supply:AC 180-264V 50Hz/60Hz(standard);AC 90-132V 50Hz/60Hz(optional); * Power consumption:<100W; * External control:Input level 5V、12V(standard)、24V(optional);External control analog 0-5V(standard),0-10V,4-20mA(optional); * Communication interface:RS485 communication interface,MODBUS protocol is available; * Operating condition:0 ~ 40℃ ; * Relative humidity:<80%; * IP grade:IP65; * Dimensions(LxWxH):330mm×220mm×235mm; * Weight: 7.1kg;

Intelligent Industrial Peristaltic Pump

WG600S Industrial Speed

» Product introduction The pump is suitable for transferring large amount of fluid in industry. One channel flow range: 0.4-13 L/min, speed range: 30-600 rpm. It can cascade two pump heads. It adopts the brushless motor drive with large torque, free maintenance. Having basic functions:such as reversible direction, start/stop, full speed (fast cleaning) and speed-variable. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * Stainless steel housing. * keypad controls running speed, reversible direction, start/stop, full speed, easy operation. * Applicable pump head: YZ35, 2xYZ35. * One channel flow range: 0.4-13(L/min). * Speed resolution: 1rpm. * Four-figure digital LED indicator displays working speed. * Brushless motor drive, free maintenance. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid,alkali,sodium and the organic solvents. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator, can choose 5V,12V,24V. External analog adjusts the rotate speed, can choose 0- 5V/10V, 4-20mA. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. » Technical parameters * One channel flow range :0.4-13L/min * Flow accuracy:<3% * Speed range:30-600rpm. * Speed resolution: 1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), * Power consumption:<300W * External control:Input electrical level 5V, 12V (standard),24V(optional). * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)340mmx235mmx175mm * Weight:13KG

WG600F

» Product introduction The pump is suitable for transferring and dispensing large amount of fluid in industry. One channel flow range: 0.01-13L/min; speed range: 0.1-600 rpm. It can cascade two pump heads. It adopts the brushless servo motor drive with large torque, free maintenance, high rotating accuracy. Having basic functions: such as reversible direction, start/stop, full speed (fast cleaning) and speed-variable. The pump has three types of distributing mode: time dispensing mode; volume dispensing mode; copy dispensing mode, meets all kinds of complex dispensing requirements. RS485 interface, as adopting the MODBUS communication protocol, the pump is easier to be connected with other equipments, such as computer, human machine interface and PLC. » Function and Feature * One channel flow range: 0.01-13(L/min) * Applicable pump head: YZ35, 2xYZ35. * Brushless servo motor drive with large torque, no maintenance, high rotating accuracy. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Color LCD displaying, touch screen and keypad for operating. * Reversible direction, start/stop and full speed, state memory (power-down memory). * Speed resolution: <0.1rpm, speed accuracy : <0.5% * Calibrating flow function. * Three types of distributing mode: time dispensing mode; volume dispensing mode; copy dispensing mode. * Automatically store five groups of working parameters. * The operating expert system guides users setting parameters correctly. * Remote infrared controlling function. * Super anti-interference feature, wide input voltage range, acceptable for the complex power environment. * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid, alkali, sodium and the organic solvents. * External high-low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator, can choose 5V,12V,24V. External analog adjusts the rotate speed, can choose 0-5V/10V, 4-20mA. * RS485 interface, MODBUS protocol is available, easy to connect other equipments. » Technical parameters * One channel flow range :0.01-13L/min * Flow accuracy:<0.5% * Speed range:0.1-600rpm. * Speed resolution: 0.1 rpm * Power supply :AC 220V±10%,50Hz/60Hz(standard), * Power consumption:<300W * External control:Input electrical level 5V, 12V (standard),24V(optional). * External communication interface:RS485 communication interface, support the MODBUS protocol. * Ambient temperature:0 ~ 40℃ * Relative humidity:<80% * IP grade:IP31 * Dimensions(LxWxH)350mmx235mmx315mm * Weight:15KG

Four Channels Filling System

DS100

» Product introduction Four channels dispensing system is suitable for various fluid; volume range: 0.5-100 mL; four filling channels can work at the same time. Each channel will stop working when lack of the bottle. Color LCD touch screen with intuitive and clear displaying interface, easy to operate. » Function and Feature * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Color LCD touch screen with intuitive and clear displaying interface, easy to operate. * Unique intelligent calibration system, greatly reducing the workload of users and improving efficiency. * Can cascade for more channels * Applicable pump head: YZ15, YZ25 * Volume range: 0.1-100 ml/min. * Dispensing time: 0.1-99.99 second. * Dispensing accuracy: up to 0.5%. * Speed resolution: 0.1rpm. * Fine adjustment on line, it is convenient for users adjusting flow rate as tubing’s aging. * With offline and online function for each channel. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Each channel will stop working when lack of the bottle. » Technical parameters * Technical parameters: DS100 * Filling range(mL): 0.5-100 * Speed range(rpm): 0.1-150 * Speed resolution(rpm): 0.1 * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz(standard ) ; AC110± 10% 50Hz/60Hz(optional) * Power consumption: <160W * External control : External bottle-lack signal and start signal * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40 °C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 940x230x247(mm) * Weight: 21kg

DS300

» Product introduction Four channels dispensing system is suitable for various fluid; volume range: 0.5-300 mL; four filling channels can work at the same time. Each channel will stop working when lack of the bottle. Color LCD touch screen with intuitive and clear displaying interface, easy to operate. » Function and Feature * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Color LCD touch screen with intuitive and clear displaying interface, easy to operate. * Unique intelligent calibration system, greatly reducing the workload of users and improving efficiency. * Can cascade for more channels * Applicable pump head: YZ15, YZ25 * Volume range: 0.1-300 ml/min. * Dispensing time: 0.1-99.99 second. * Dispensing accuracy: up to 0.5%. * Speed resolution: 0.1rpm. * Fine adjustment on line, it is convenient for users adjusting flow rate as tubing’s aging. * With offline and online function for each channel. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Each channel will stop working when lack of the bottle. » Technical parameters * Technical parameters: DS100 * Filling range(mL): 0.5-300 * Speed range(rpm): 0.1-350 * Speed resolution(rpm): 0.1 * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz(standard ) ; AC110± 10% 50Hz/60Hz(optional) * Power consumption: <200W * External control : External bottle-lack signal and start signal * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40 °C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 940x230x247(mm) * Weight: 23kg

DS600

» Product introduction Four channels dispensing system is suitable for various fluid; volume range: 0.5-500 mL; four filling channels can work at the same time. Each channel will stop working when lack of the bottle. Color LCD touch screen with intuitive and clear displaying interface, easy to operate. » Function and Feature * Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid、alkali、sodium and the organic solvents. * Color LCD touch screen with intuitive and clear displaying interface, easy to operate. * Unique intelligent calibration system, greatly reducing the workload of users and improving efficiency. * Can cascade for more channels * Applicable pump head: YZ15, YZ25 * Volume range: 0.1-500 ml/min. * Dispensing time: 0.1-99.99 second. * Dispensing accuracy: up to 0.5%. * Speed resolution: 0.1rpm. * Fine adjustment on line, it is convenient for users adjusting flow rate as tubing’s aging. * With offline and online function for each channel. * The circuit board with conformal coating makes it dust-proof and moisture-proof. * Each channel will stop working when lack of the bottle. » Technical parameters * Technical parameters: DS100 * Filling range(mL): 0.5-500 * Speed range(rpm): 0.1-600 * Speed resolution(rpm): 0.1 * Flow accuracy: <0.5% * Power supply: AC220V ± 10% 50Hz/60Hz(standard ) ; AC110± 10% 50Hz/60Hz(optional) * Power consumption: <240W * External control : External bottle-lack signal and start signal * Communication interface: RS485 communication interface, MODBUS protocol is available. * Operating condition: Temperature 0 ~ 40 °C; Relative humidity <80% * IP grade: IP31 * Dimensions(LxWxH): 940x230x247(mm) * Weight: 25kg