GFL

Çalkalamali Su Banyosu

Gfl Water Bath - Shaking Water Bath 1083

Specifications and features      Microprocessor-controlled temperature regulation. Excellent temperature constancy: ± 0.1 °C temporal. Optimum temperature distribution throughout the whole bath interior. Digital temperature readout and setting via LED display, in steps of 0.1 °C. Soft touch keys with characteristic symbols. Electronic monitoring; in case of fault, cause is reported on display. Two independently working over-temperature protections. Maintenance-free and low-wear shaking mechanism, continuously adjustable electronic speed control, gentle start-up. Constant speed independent of load. The shaking device is guided on corrosion-resistant special ball bearings. Easily removable shaking rack. Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes. Bath interior and shaking rack made of stainless steel. Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated. Drain cock at the back of the bath.     Applications       GFL Shaking Water Baths are particularly used whenever exactly reproducible temperatures are required for shaking tasks. Their scope of applications comprises incubations, fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies. Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperature to +99.9 °C Capacity approx. 20 l Shaking motion reciprocating, with on / off switch Shaking frequency from 10 - 250 min -1 Shaking amplitude 22 mm Working height of bath (including lid) 190 mm (above shaking rack) Max. water level above shaking rack / tray 105 mm / 90 mm Inner dimensions (W x D x H) 450 x 300 x 160 mm Exterior dimensions (W x D x H) 715 x 520 x 330 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight 28.0 / 32.0 kgs Packing volume approx. 0.29 m3 * other voltages and frequencies on request GFL MARKA ÇALKALAMALI SU BANYOLARI : Ileri-geri ve orbital sekilde banyo içinde tüp,erlen ve flasklarda çalkalama islemine uygun 3 degisik modeli mevcuttur. GFL Model 1083         ileri-geri (yatay) çalkalamali ve dijital sicaklik göstergeli modeldir. GFL Model 1086         ileri-geri (yatay) çalkalamali,gömme sogutucu sarmal üniteli ,dijital sicaklik ve çalkalama frekansi göstergeli modeldir. GFL Model 1092         orbital çalkalamali, gömme sogutucu sarmal üniteli, banyo sicakligi ve çalkalama hizi dijital olarak izlenebilir bir modeldir.

Gfl Water Bath - Shaking Water Bath 1086

Specifications and features           Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.   Optimum temperature distribution throughout the whole bath interior.   Digital temperature readout and setting via LED display, in steps of 0.1 °C.   Digital display for shaking frequency.   Soft touch keys with characteristic symbols.   Electronic monitoring; in case of fault, cause is reported on display.   Two independently working over-temperature protections.   Maintenance-free and low-wear shaking mechanism, continuously adjustable electronic speed control, gentle start-up.   Constant speed independent of load.   The shaking device is guided on corrosion-resistant special ball bearings.   Easily removable shaking rack.   Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.   Bath interior and shaking rack made of stainless steel.   Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.   Built-in cooling coil for applications below ambient temperature as a standard scope of supply.   Drain cock at the back of the bath.   Applications            GFL Shaking Water Baths are particularly used whenever exactly reproducible temperatures are required for shaking tasks. Their scope of applications comprises incubations, fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies. Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperature to +99.9 °C Temperature range (operation with cooling coil) +10 °C to +99.9 °C* Capacity approx. 20 l Shaking motion reciprocating, with on / off switch Shaking frequency from 10 - 250 min -1 Shaking amplitude 22 mm Working height of bath (including lid) 190 mm (above shaking cage) Max. water level above shaking rack / tray 105 mm / 90 mm Inner dimensions (W x D x H) 450 x 300 x 160 mm Exterior dimensions (W x D x H) 715 x 520 x 330 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW ** Net / gross weight 30.0 / 34.0 kgs Packing volume approx. 0.29 m3 * depending on cooling medium and ambient temperature ** other voltages and frequencies on request

Gfl Water Bath - Shaking Water Bath 1092

Specifications and features     Microprocessor-controlled temperature regulation. Excellent temperature constancy: ± 0.1 °C temporal. Optimum temperature distribution throughout the whole bath interior. Digital temperature readout and setting via LED display, in steps of 0.1 °C. Digital display for shaking frequency. Soft touch keys with characteristic symbols. Electronic monitoring; in case of fault, cause is reported on display. Two independently working over-temperature protections. Maintenance-free and low-wear shaking mechanism, continuously adjustable electronic speed control, gentle start-up. Constant speed independent of load. Easily removable shaking rack. Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes. Bath interior and shaking rack made of stainless steel. Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated. Built-in cooling coil for applications below ambient temperature as a standard scope of supply. Drain cock at the back of the bath. Applications       GFL Shaking Water Baths are particularly used whenever exactly reproducible temperatures are required for shaking tasks. Their scope of applications comprises incubations, fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies. Technical details Temperature range approx. 5 °C above ambient temperature to +80 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperature to +80 °C Temperature range (operation with cooling coil) +10 °C to +80 °C* Capacity approx. 20 l Shaking motion orbital, with on / off switch Shaking frequency from 10 - 250 min -1 Shaking amplitude 14 mm Working height of bath (including lid) 190 mm (above shaking rack) Max. water level above shaking rack / tray 105 mm / 90 mm Inner dimensions (W x D x H) 450 x 300 x 160 mm Exterior dimensions (W x D x H) 635 x 505 x 400 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW ** Net / gross weight 35.0 / 40.0 kgs

Gfl Water Bath - Thermolab 1070

Specifications and features Quadrothermal shaking water bath with four separate, independently heatable basins. Microprocessor-controlled temperature regulation. Excellent temperature constancy: ± 0.1 °C temporal. Optimum temperature distribution throughout the whole bath interior. Digital temperature readout and setting via LED display, in steps of 0.1 °C. Soft touch keys with characteristic symbols. Electronic monitoring; in case of fault, cause is reported on display. Two independently working over-temperature protections. Maintenance-free and low-wear shaking mechanism, continuously adjustable electronic speed control, gentle start-up. Height-adjustable sample holders. Bath interiors and shaking racks made of stainless steel. Four double-walled arched lids with insulating capacity - no dropping back of condensed water into the vessels. Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated. Drain cock at the back of the bath.  Applications         THERMOLAB (r) is versatilely applicable and exemplary when an excellent temperature constancy is called for, e. g. for polymerase chain reactions (PCR), for the preparation of enzyme and DNA tests or hybridisations. Technical details Temperature range approx. 5 °C above ambient temperature to 99.9 °C Shaking motion reciprocating, with on / off switch Shaking frequency from 2 - 50 min -1 Shaking amplitude 22 mm Working height of bath 80 mm Sample holder hight-adjustable, 32 mm Dimensions sample holder 128 x 128 mm Inner dimensions (W x D x H) 175 x 175 x 100 mm, each bassin Exterior dimensions (W x D x H) 625 x 556 x 270 mm Electrical connection 230 V / 50...60 Hz / 1.3 kW Net / gross weight 28.0 / 36.0 kgs Packing volume approx. 0.34 m3 GFL Model ThermoLAB 1070 : 4 ayri isitma bölgeli ve kontrol sistemli, iler-geri (yatay) hareketli çalkalamali su banyosudur. Çalkalama hizi 2 ile 50 rpm arasi ayarlanabilir olup özellikle satbil sicaklik islemi gerektiren PCR çalismalari,enzim ve DNA testleri ve hibridizasyon çalismalari için özel üretilmis banyodur.        

GFL Çalkalayici

Gfl Shaker - Orbital Shaker 3005

Specifications and features          Powerful, quiet and space-saving orbital shaker. Excellently applicable for continuous operation. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism. Constant speed independent of load. Shaking platform made of anodised aluminium. Housing made of high impact strength polystyrene. Comprehensive range of accessories  Applications         This compact Orbital Shaker proves its performance capability in daily use in biology and microbiology laboratories and in diagnostic test reactions. It is also used in laboratories, incubation and moderating rooms at ambient temperatures between +10 and +50 °C. Technical details Shaking motion orbital Control analogue Shaking platform 330 x 330 mm Load capacity max. 8 kgs Shaking frequency 20 - 500 rpm Shaking amplitude 10 mm Timer up to 60 minutes or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 380 x 510 x 140 mm Electrical connection 230 V / 50...60 Hz / 40 W * Net / gross weight 11.0 / 17.0 kgs Packing volume 0.1 m3 * other voltages and frequencies on request Orbital Çalkalayicilar :   GFL Marka orbital çalkalayicilarin dijital ya da analog modellerden seçim yapabilirsiniz.Tüm dijital modeller mikroprosesör kontrollü olup data transferini saglayacak RS 232 çikislidir.  Model 3005       Analog model Max. yükleme kapasitesi            : 8 kg Hiz ayar araligi                         : 20-300 rpm Çalkalama platform boyutlari     : 330x330mm   Model 3015       Analog model Max. yükleme kapasitesi            : 15 kg Hiz ayar araligi                         : 20-300 rpm Çalkalama platform boyutlari     : 450x450mm  Model 3017       Dijital model Max. yükleme kapasitesi            : 15 kg Hiz ayar araligi                         : 20-300 rpm Çalkalama platform boyutlari     : 450x450mm  Model 3019       Analog model Max. yükleme kapasitesi            : 30 kg Hiz ayar araligi                         : 20-250 rpm Çalkalama platform boyutlari     : 676x540mm  Model 3020       Dijital model Max. yükleme kapasitesi            : 30 kg Hiz ayar araligi                            : 20-250 rpm Çalkalama platform boyutlari     : 676x540mm  

Gfl Shaker - Orbital Shaker 3015

Specifications and features       Silently operating and universally applicable Orbital Shaker, long-lasting. Excellently applicable for continuous operation. Universally applicable through the large amplitude, low noise. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism, ensuring high stability and dependability for continuous operation. Constant speed independent of load. Shaking platform made of anodised aluminium. Housing made of high impact strength polystyrene. Comprehensive range of accessories Applications         What counts when growing micro-organisms, cell and tissue cultures is a "reliable colleague" - an indispensable ingredient for successful work in biochemistry, microbiology, biotechnology, bacteriology and virology. Thus, this unit is particularly well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion orbital Control analogue Shaking platform 450 x 450 mm Load capacity max. 15 kgs Shaking frequency 20 - 300 rpm Shaking amplitude 30 mm Timer up to 60 minutes or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 510 x 625 x 142 mm Electrical connection 230 V 50...60 Hz / 65 W * Net / gross weight 19.0 / 25.0 kgs Packing volume 0.16 m3 * other voltages and frequencies on request

Gfl Shaker - Orbital Shaker 3017

Specifications and features      Silently operating and universally applicable Orbital Shaker, long-lasting. User-friendly microprocessor technique Excellently applicable for continuous operation. Universally applicable through the large amplitude, low noise. Digital shaking frequency readout and setting via LC-display, in steps of 1.0 rpm, gentle start-up. Remaining time indication through LC display. RS 232 serial interface for trouble-free data transfer. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Shaking platform made of anodised aluminium. Compact, low-wear counterbalanced drive mechanism, ensuring high stability and dependability for continuous operation. Constant speed independent of load. Housing made of high impact strength polystyrene. Comprehensive range of accessories   Applications       What counts when growing micro-organisms, cell and tissue cultures is a "reliable colleague" - an indispensable ingredient for successful work in biochemistry, microbiology, biotechnology, bacteriology and virology. Thus, this unit is particularly well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion orbital Control digital Shaking platform 450 x 450 mm Load capacity max. 15 kgs Shaking frequency 20 - 300 rpm Shaking amplitude 30 mm Timer 1 minute to 99:59 hours or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 510 x 625 x 142 mm Electrical connection 230 V or 115 V * / 50 or 60 Hz* / 65 W Net / gross weight 19.0 / 25.0 kgs Packing volume 0.16 m3 * please indicate when ordering

Gfl Shaker - Orbital Shaker 3019

Specifications and features        Dependable, long-life Orbital Shaker with a large shaking tray for accomodating heavier loads. Excellently applicable for continuous operation. Universally applicable through the large amplitude, low noise. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism. Constant speed independent of load. Large shaking platform made of electrolytically galvanised, powder-coated sheet steel, equipped with four support rods with screw-type clamps for secure attachment of accessories. Special rubber pad ensures a non-slip grip of objects on the shaking tray. Housing made of high impact strength polystyrene. Comprehensive range of accessories. Applications       This powerful orbital shaker is preferably used for e. g. analytical or diagnostic applications in the pharmaceutical industry, chemistry, biology, in plant breeding or nutritional industry. It is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion orbital Control analogue Shaking platform 676 x 540 mm Load capacity max. 30 kgs Shaking frequency 20 - 250 rpm (when the rack frame is used: 20 - 200 rpm) Shaking amplitude 32 mm Timer up to 60 minutes or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 745 x 730 x 135 mm Electrical connection 230 V 50...60 Hz / 90 W * Net / gross weight 33.6 / 50.0 kgs Packing volume 0.51 m3 * other voltages and frequencies on request

Gfl Shaker - Orbital Shaker 3020

Specifications and features       Dependable, long-life Orbital Shaker with a large shaking tray for accomodating heavier loads. User-friendly microprocessor technique Excellently applicable for continuous operation. Universally applicable through the large amplitude, low noise. Digital shaking frequency readout and setting via LC-display, in steps of 1.0 rpm, gentle start-up. Remaining time indication through LC display. RS 232 serial interface for trouble-free data transfer. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism. Constant speed independent of load. Large shaking platform made of electrolytically galvanised, powder-coated sheet steel, equipped with four support rods with screw-type clamps for secure attachment of accessories. Special rubber pad ensures a non-slip grip of objects on the shaking tray. Housing made of high impact strength polystyrene. Comprehensive range of accessories This powerful orbital shaker is preferably used for e. g. analytical or diagnostic applications in the pharmaceutical industry, chemistry, biology, in plant breeding or nutritional industry. It is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion orbital Control digital Shaking platform 676 x 540 mm Load capacity max. 30 kgs Shaking frequency 20 - 250 U/min. (when the rack frame is used: 20 - 200 rpm) Shaking amplitude 32 mm Timer 1 minute - 99:59 hours or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 745 x 730 x 135 mm Electrical connection 230 V or 115 V * / 50 or 60 Hz * / 90 W Net / gross weight 33.6 / 50.0 kgs Packing volume 0.51 m3 * please indicate when ordering!

Gfl Shaker - Overhead Rotator 3040

Specifications and features       Rugged design, easy operation, multi-purpose. Electronic speed control, stepless. Clearly laid out control panel for easy operation. A DC (direct current) motor with overload protection drives the unit. Constant speed during continuous operation. Compact, low-wear counterbalanced drive mechanism. Rotating rack with ball bearings on both sides, able to accomodate max. 12 flasks/vessels up to a diameter of 110 mm and a heigth of 270 mm. Holding device made of stainless steel for safe, secure clamping of the sample vessels. Housing made of electrolytically galvanised sheet steel, powder-coated. Applications       The uniform rotating motion of this special Shaker make it particularly well-suited for processing soil samples in glass/plastic wide-mouth vessels with up to 2000 ml rated volume as per DIN 38414, Part 4 "German Standard Methods for Water, Wastewater and Sludge Analysis - Determination of Leachability by Water". This unit can be used in ambient temperatures between +10 and +40 °C. Technical details Shaking motion overhead-rotating Control analogue Load capacity max. 20 kgs with uniform load distribution Capacity max. 12 bottles / vessels Flask / Vessel dimensions max. diameter: 110 mm Ø max. height: 270 mm round or rectangular Shaking frequency 1 - 20 rpm Ambient temperature +10 °C to +40 °C Electrical connection 230 V / 50...60 Hz / 100 W * Exterior dimensions (W x D x H) 770 x 700 x 715 mm Net / gross weight 65.0 / 78.0 kgs Packing volume 0.86 m3 * other voltages and frequencies on request Over-head Çalkalayici : Model 3040 Analog Model Hareket tarzi                            : Asagi yukari rotasyonla Max. sise sallama kapasiyesi      : 12 sise /kap (yuvarlak veya dikdörtgen ) Max. sise çapi                           : 110mm max. sise yüksekligi                   : 270mm Hiz ayar                                   : 1-20 rpm Yükleme kapasitesi                    : 20 kg

Gfl Shaker - Reciprocating Shaker 3006

Specifications and features       Robust, space-saving and quiet reciprocating shaker. Excellently applicable for continuous operation. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism. Constant speed independent of load. Shaking platform made of anodised aluminium. Housing made of high impact strength polystyrene. Comprehensive range of accessories  Applications       This shaker is successfully used in medical diagnostics or analysis as well as for growing micro-organisms, cell and tissue cultures. It is particularly used in laboratories, incubation and moderating rooms at ambient temperatures between +10 and +50 °C. Technical details Shaking motion reciprocating Control analogue Shaking platform 330 x 330 mm Load capacity max. 8 kgs Shaking frequency 20 - 300 rpm Shaking amplitude 20 mm Timer up to 60 minutes or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 380 x 510 x 140 mm Electrical connection 230 V / 50...60 Hz / 40 W * Net / gross weight 11.0 / 17.0 kgs Packing volume 0.1 m3 * other voltages and frequencies on request Yatay (Ileri-Geri) Çalkalayicilar : Model 3006 Analog model Max. yükleme kapasitesi            : 8 kg Hiz ayar araligi                         : 20-300 rpm Çalkalama platform boyutlari      : 330x330mm Model 3016 Analog model Max. yükleme kapasitesi            : 15 kg Hiz ayar araligi                         : 20-300 rpm Çalkalama platform boyutlari      : 450x450mm Model 3018 Dijital model Max. yükleme kapasitesi            : 15 kg Hiz ayar araligi                         : 20-300 rpm Çalkalama platform boyutlari      : 450x450mm

Gfl Shaker - Reciprocating Shaker 3016

Specifications and features     Versatile, powerful and long-lasting reciprocating (back-and-forth) shaker. Excellently applicable for continuous operation. Universally applicable through the large amplitude, low noise. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism, ensuring high stability and dependability for continuous operation. Constant speed independent of load. Housing made of high impact strength polystyrene. Comprehensive range of accessories Applications       The producers of suspensions and emulsions know this shaker well. The shaking platform's jerky back-and-forth motion creates high turbulence, thus thoroughly mixing the media. This is a vital prerequisite, for example, in medical diagnostics, or in foodstuffs or environmental analyses. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion reciprocating Control analogue Shaking platform 450 x 450 mm Load capacity max. 15 kgs Shaking frequency 20 - 300 rpm Shaking amplitude 30 mm Timer up to 60 minutes or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 510 x 625 x 145 mm Electrical connection 230 V / 50...60 Hz / 65 W * Net / gross weight 19.0 / 25.0 kgs Packing volume 0.16 m3 * other voltages and frequencies on request

Gfl Shaker - Reciprocating Shaker 3018

Specifications and features Versatile, powerful and long-lasting reciprocating (back-and-forth) shaker. User-friendly microprocessor technique Excellently applicable for continuous operation. Universally applicable through the large amplitude, low noise. Digital shaking frequency readout and setting via LC-display, in steps of 1.0 rpm, gentle start-up. Remaining time indication through LC display. RS 232 serial interface for trouble-free data transfer. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism, ensuring high stability and dependability for continuous operation. Constant speed independent of load. Housing made of high impact strength polystyrene. Comprehensive range of accessories  The producers of suspensions and emulsions know this shaker well. The shaking platform's jerky back-and-forth motion creates high turbulence, thus thoroughly mixing the media. This is a vital prerequisite, for example, in medical diagnostics, or in foodstuffs or environmental analyses. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion reciprocating Control digital Shaking platform 450 x 450 mm Load capacity max. 15 kgs Shaking frequency 20 - 300 rpm Shaking amplitude 30 mm Timer 1 minute - 99:59 hours or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 510 x 625 x 145 mm Electrical connection 230 V or 115 V * / 50 or 60 Hz * / 65 W Net / gross weight 19.0 / 25.0 kg Packing volume 0.16 m3 *please indicate when ordering!

Gfl Shaker - Rocking Shaker 3013

Specifications and features  Model 3013 Analog model Max. yükleme kapasitesi            : 15 kg Hiz ayar araligi                         : 2-50 rpm Çalkalama platform boyutlari      : 450x450mm Model 3014 Dijital model Max. yükleme kapasitesi            : 15 kg Hiz ayar araligi                         : 2-50 rpm Çalkalama platform boyutlari      : 450x450mm   Powerful and quiet rocking shaker, long-lasting. Excellently applicable for continuous operation. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism, ensuring dependability for continuous operation at slow rocking motion. Constant speed independent of load. Shaking platform made of anodised aluminium. Housing made of high impact strength polystyrene. Comprehensive range of accessories Applications       This model has proven itself through reliable and perfect work, also for continuous operation, and is always called upon when the best possible supply of parallel cultures and cell lines is required, or for staining or discoloration of gels. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion rocking Control analogue Shaking platform 450 x 450 mm Load capacity max. 15 kgs Rocking frequency 2 - 50 rpm Amplitude 3 degrees Timer up to 60 minutes or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 510 x 625 x 168 mm Electrical connection 230 V / 50...60 Hz / 90 W * Net / gross weight 18.0 / 24.0 kgs Packing volume 0.16 m3 * other voltages and frequencies on request Rocking Çalkalayicilar :

Gfl Shaker - Rocking Shaker 3014

Specifications and features Powerful and quiet rocking shaker, long-lasting. User-friendly microprocessor technique Excellently applicable for continuous operation. Digital shaking frequency readout and setting via LC-display, in steps of 0.5 rpm, gentle start-up. Remaining time indication through LC display. RS 232 serial interface for trouble-free data transfer. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism, ensuring dependability for continuous operation at slow rocking motion. Constant speed independent of load. Housing made of high impact strength polystyrene. Comprehensive range of accessories Technical details Shaking motion rocking Control digital Shaking platform 450 x 450 mm Load capacity max. 15 kgs Rocking frequency 2 - 50 rpm Amplitude 3 degrees Timer 1 minute - 99:59 hours or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 510 x 625 x 168 mm Electrical connection 230 V or 115 V * / 50 or 60 Hz * / 90 W Net / gross weight 18.0 / 24.0 kg Packing volume 0.16 m3 * please indicate when ordering!    

Gfl Shaker - Test Tube Rotating Shaker 3025

Specifications and features Dependable, long-lasting and maintenance-free rotator. Electronic speed control, stepless. Clearly laid out control panel for easy operation. Compact, low-wear counterbalanced drive mechanism. Removable axle for loading outside of the rotator. Alternative axle equipable with clamps of different sizes optionally available (without surcharge, on request). Axle and drip pan made of stainless steel. Housing made of electrolytically galvanised sheet steel, powder-coated. Applications       Smooth and exact motion - that is what this rotator model guarantees when it comes to separating and/or mixing applications. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion overhead-rotating Control analogue Rotation axle capacity max. 24 test tubes, 12-17 mm Ø tube lenght: from 75 to 180 mm Speed 6 - 80 rpm Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 490 x 330 x 220 mm Electrical connection 230 V / 50...60 Hz / 80 W * Net / gross weight 9.6 / 15.0 kgs Packing volume approx. 0.1 m3 * other voltages and frequencies on request Test tüp Rotatörü: Model 3025 Analog model Hareket tarzi                            : Asagi-yukari rotasyonla Max. tüp çalkalama kapasitesi    : 24 adet ( 12-17mm çapli ) Devir ayari                               : 6-80 rpm  

Gfl Shaker - Vibration Shaker 3023

Specifications and features     Quiet vibration shaker with orbital motion, long-lasting. Very high vibration frequency at low shaking amplitude for best possible mixing, even in the smallest test vessels. Excellently applicable for continuous operation. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism. Constant speed independent of load. Housing made of high impact strength polystyrene.    Applications       Reliable, versatile, efficient - the characteristics that make this shaker so interesting for use in medical diagnostics, biotechnology or microbiology. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion orbital / vibrating Control analogue Shaking platform 330 x 330 mm Capacity max. 6 test plates Load capacity max. 1.2 kgs Shaking frequency 100 - 1450 rpm Shaking amplitude 3 mm Timer up to 60 minutes or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 380 x 510 x 125 mm Electrical connection 230 V / 50...60 Hz / W * Net / gross weight 9.0 / 12.0 kgs Packing volume 0.1 m3 * other voltages and frequencies on request Vibrasyonlu Çalkalayici : Model 3023 Analog model Çalkalama Platform boyutlari      : 330x330 mm Max. yükleme kapasitesi            : 6 mikroplaka (1.2 kg) Sallama çapi                             : 3 mm Çalkalama devir araligi              : 100-1450 rpm

Gfl Shaker - Orbital Rocking Shaker 3011

 Specifications and features    Model 3011       Analog model Max. yükleme kapasitesi            : 15 kg Hiz ayar araligi                         : 2-50 rpm Çalkalama platform boyutlari     : 450x450mm   Model 3012       Dijital model Max. yükleme kapasitesi            : 15 kg Hiz ayar araligi                         : 2-50 rpm Çalkalama platform boyutlari     : 450x450mm Silent operating orbital-rocking shaker, long-lasting. Gentle and uniform motion. Excellently applicable for continuous operation. Electronic speed control, stepless, with gentle start-up. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism, ensuring dependability for continuous operation at three-dimensional motion. Constant speed independent of load. Shaking platform made of anodised aluminium. Housing made of high impact strength polystyrene. Comprehensive range of accessories Applications     In AIDS research, for diagnostic tests with test plates, or for growing cell cultures and micro-organisms this unit has become indispensable. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion three-dimensional (orbital-rocking) Control analogue Shaking platform 450 x 450 mm Load capacity max. 15 kgs Shaking frequency 2 - 50 rpm Amplitude 3 degrees Timer up to 60 minutes or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 510 x 625 x 168 mm Electrical connection 230 V / 50...60 Hz / 90 W * Net / gross weight 20.0 / 26.0 kgs Packing volume 0.16 m3 * other voltages and frequencies on request Orbital-Rocking Çalkalayicilar :

Orbital Rocking Shaker 3012

Specifications and features     Silent operating orbital-rocking shaker, long-lasting. User-friendly microprocessor technique Gentle and uniform motion. Excellently applicable for continuous operation. Digital shaking frequency readout and setting via LC-display, in steps of 0,5 rpm, gentle start-up. Remaining time indication through LC display. RS 232 serial interface for trouble-free data transfer. Clearly laid out control panel for easy operation. An a.c. motor with overload protection drives the unit. Compact, low-wear counterbalanced drive mechanism, ensuring dependability for continuous operation at three-dimensional motion. Constant speed independent of load. Housing made of high impact strength polystyrene. Comprehensive range of accessories  Applications       In AIDS research, for diagnostic tests with test plates, or for growing cell cultures and micro-organisms this unit has become indispensable. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C. Technical details Shaking motion three-dimensional (orbital-rocking) Control digital Shaking platform 450 x 450 mm Load capacity max. 15 kgs Shaking frequency 2 - 50 rpm Amplitude 3 degrees Timer 1 minute - 99:59 hours or continuous operation Ambient temperature +10 °C to +50 °C Exterior dimensions (W x D x H) 510 x 625 x 168 mm Electrical connection 230 V or 115 V * / 50 or 60 Hz * / 90 W Net / gross weight 20.0 / 26.0 kg Packing volume 0.16 m3 * please indicate when ordering!

Distile Su Cihazi

Gfl Water Still - Double Distillation Water Still 2102

Specifications and features       Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting. Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details"). Electronic level control during the whole distilling process. Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator 1st stage, the red pilot lamp "Clean" will glow. Double-action low water cut-off through float switch and thermostatic safety switch. Economical energy consumption by distillation of the heated cooling water. Water saving through automatic water cut-off. Unnecessary water consumption will be avoided. Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of borosilicate glass. Evaporator easily accessible for cleaning purposes . Distillate withdrawal: valve made of borosilicate glass with teflon plunger for single distillate, outlet with dust shield made of borosilicate glass for double distillate. CO2 degassing through outlet in the condenser. Heating element and evaporator made of stainless steel. Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin. Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm). Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm). Hoses for water in- and outlet are available as accessory. Applications       GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 2 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 72 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 500 x 260 x 470 mm Electrical connection 230 V / 50...60 Hz / 3.5 kW ** Net weight approx. 18.0 kgs Gross weight (cardboard box) approx. 26.0 kgs Gross weight (wooden case) approx. 30.0 kgs Packing volume approx. 0.26 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water. Bidistile Grubu Su Cihazlari : Bu üniteler hem masaüstü hem de duvara monte edilebilen modellerdir.Isitici element ve evaporatör paslanmaz çelikten mamuldür. GFL Model 2102     2 lt/saat kapasiteli GFL Model 2104     4 lt/saat kapasiteli GFL Model 2108     8 lt/saat kapasiteli

Gfl Water Still - Double Distillation Water Still 2104

Specifications and features         Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting. Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details"). Electronic level control during the whole distilling process. Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator 1st stage, the red pilot lamp "Clean" will glow. Double-action low water cut-off through float switch and thermostatic safety switch. Economical energy consumption by distillation of the heated cooling water. Water saving through automatic water cut-off. Unnecessary water consumption will be avoided. Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of borosilicate glass. Evaporator easily accessible for cleaning purposes. Distillate withdrawal: valve made of borosilicate glass with teflon plunger for single distillate, outlet with dust shield made of borosilicate glass for double distillate. CO2 degassing through outlet in the condenser. Heating element and evaporator made of stainless steel. Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin. Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm). Main switch with pilot lamp for the monitoring of both distillation stages at the front of the unit. Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm). Hoses for water in- and outlet are available as accessory.  Applications         GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 4 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 120 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 550 x 280 x 570 mm Electrical connection 400 V / 50...60 Hz / 6.5 3 Ph/N/PE three-phase current ** Net weight approx. 23.0 kgs Gross weight (cardboard box) approx. 35.0 kgs Gross weight (wooden case) approx. 45.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Double Distillation Water Still 2108

Specifications and features            Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.   Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process.  Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Double-action low water cut-off through float switch and thermostatic safety switch.  Economical energy consumption by distillation of the heated cooling water.   Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of borosilicate glass.  Evaporator easily accessible for cleaning purposes.  Distillate withdrawal: valve made of borosilicate glass with teflon plunger for single distillate, outlet with dust shield made of borosilicate glass for double distillate.  CO2 degassing through outlet in the condenser.  Heating element and evaporator made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 8 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 198 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 700 x 390 x 700 mm Electrical connection 400 V / 50...60 Hz / 11.5 kW 3 PH/N/PE three-phase current ** Net weight approx. 39.0 kgs Gross weight (cardboard box) approx. 55.0 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.56 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single & Double Distilation 2202

Specifications and features            Glass Water Still for single distillation (fully automatic), suitable for both bench and wall mounting.   Very good distillate quality; conductivity single distillate: approx. 2.2 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process. Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.  Water level control in the boiler automatically switches off the power in case of water shortage.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Sterillisation of the condensers by steam.  Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.  Quartz sheated heating elements.  Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.  Distillate withdrawal through hose connection at the right-hand site.  CO2 degassing through outlet in the condenser.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 2 l / h Conductivity approx. 2.2 µs / cm at 20 °C * Cooling water required approx. 48 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 200 x 390 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW ** Net weight approx. 16.0 kgs Gross weight (cardboard box) approx. 22.0 kgs Gross weight (wooden case) approx. 30.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water. Cam üniteli Mono ve Bidistile Su Cihazlari : Bu modellerde evaporatör ve kondenser üniteleri borosilikat camdan mamuldür. GFL Model 2202      2 lt/saat kapasiteli mono-distile modeli GFL Model 2204      4 lt/saat kapasiteli mono-distile modeli GFL Model 2208      8 lt/saat kapasiteli mono-distile modeli GFL Model 2302      2 lt/saat kapasiteli bi-distile modeli GFL Model 2304      4 lt/saat kapasiteli bi-distile modeli

Gfl Water Still - Single & Double Distilation 2204

Specifications and features  Glass Water Still for single distillation (fully automatic), suitable for both bench and wall mounting.   Very good distillate quality; conductivity single distillate: approx. 2.2 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process.  Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.  Water level control in the boiler automatically switches off the power in case of water shortage.  Economical energy consumption by distillation of the heated cooling water.   Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Sterillisation of the condensers by steam.  Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.  Quartz sheated heating elements.  Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.  Distillate withdrawal through hose connection at the right-hand site.  CO2 degassing through outlet in the condenser.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 4 l / h Conductivity approx. 2.2 µs / cm at 20 °C * Cooling water required approx. 96 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 200 x 390 mm Electrical connection 230 V / 50...60 Hz / 3.0 kW ** Net weight approx. 17.0 kgs Gross weight (cardboard box) approx. 22.0 kgs Gross weight (wooden case) approx. 30.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single & Double Distilation 2208

Specifications and features           Glass Water Still for single distillation (fully automatic), suitable for both bench and wall mounting.   Very good distillate quality; conductivity single distillate: approx. 2.2 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process.  Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.  Water level control in the boiler automatically switches off the power in case of water shortage.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Sterillisation of the condensers by steam.  Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.  Quartz sheated heating elements.  Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.  Distillate withdrawal through hose connection at the right-hand site.  CO2 degassing through outlet in the condenser.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).  Power supply through included mains cable (without plug).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 8 l / h Conductivity approx. 2.2 µs / cm at 20 °C * Cooling water required approx. 144 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 365 x 390 mm Electrical connection 400 V / 50...60 Hz / 6.0 kW 3 Ph/N/PE three-phase current ** Net weight approx. 24.0 kgs Gross weight (cardboard box) approx. 30.0 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single & Double Distilation 2302

Specifications and features           Glass Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.   Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details").   Electronic level control during the whole distilling process.   Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.   Water level control in the boiler automatically switches off the power in case of water shortage.   Economical energy consumption by distillation of the heated cooling water.   Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.   Sterillisation of the condensers by steam.   Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.   Quartz sheated heating elements.   Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.   Distillate withdrawal through hose connection at the right-hand site.   CO2 degassing through outlet in the condenser.   Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.   Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).   Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).   Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 2 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 96 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 365 x 390 mm Electrical connection 230 V / 50...60 Hz / 2.9 kW ** Net weight approx. 24.0 kgs Gross weight (cardboard box) approx. 30.5 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single & Double Distilation 2304

Specifications and features Glass Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.   Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process.  Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.  Water level control in the boiler automatically switches off the power in case of water shortage.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Sterillisation of the condensers by steam.  Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.  Quartz sheated heating elements.  Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.  Distillate withdrawal through hose connection at the right-hand site.  CO2 degassing through outlet in the condenser.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).  Power supply through included mains cable (without plug).  Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 4 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 144 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 365 x 390 mm Electrical connection 400 V / 50...60 Hz / 5.8 kW 3 PH/N/PE three-phase current ** Net weight approx. 24.0 kgs Gross weight (cardboard box) approx. 31.5 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single Distillation Water Still 2002

Specifications and features        Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.   Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  The distillate storage tank accepts twice the hourly capacity of the still.  Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.  Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Evaporator easily accessible for cleaning purposes.  Condenser (cooling coil) inside the storage tank, easily exchangeable.  Distillate withdrawal through drain cock with continuous and touch position.  CO2 degassing through outlet in the condenser.  Heating element, evaporator, storage tank and condenser made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory.        Applications   GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications.   Technical details Capacity 2 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Storage tank capacity 4 l Cooling water required approx. 30 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 540 x 290 x 420 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW ** Net weight approx. 15.4 kgs Gross weight (cardboard box) approx. 18.5 kgs Gross weight (wooden case) approx. 30. kgs Packing volume approx. 0.16 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water. Mono-Distile Grubu Cihazlari   ( Depolama tank üniteli modeller ) : GFL Model 2002     2 lt/saat kapasiteli , 4 lt depolama tank üniteli GFL Model 2004     4 lt/saat kapasiteli , 8 lt depolama tank üniteli GFL Model 2008     8 lt/saat kapasiteli , 16 lt depolama tank üniteli GFL Model 2012     12 lt/saat kapasiteli , 24 lt depolama tank üniteli

Gfl Water Still - Single Distillation Water Still 2004

Specifications and features          Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.   Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  The distillate storage tank accepts twice the hourly capacity of the still.  Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.  Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Evaporator easily accessible for cleaning purposes.  Condenser (cooling coil) inside the storage tank, easily exchangeable.  Distillate withdrawal through drain cock with continuous and touch position.  CO2 degassing through outlet in the condenser.  Heating element, evaporator, storage tank and condenser made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 4 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Storage tank capacity 8 l Cooling water required approx. 48 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 620 x 330 x 460 mm Electrical connection 230 V / 50...60 Hz / 3.0 kW ** Net weight approx. 20.2 kgs Gross weight (cardboard box) approx. 24.0 kgs Gross weight (wooden case) approx. 35.0 kgs Packing volume approx. 0.16 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single Distillation Water Still 2008

Specifications and features           Power supply through included mains cable (without plug).   Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.  Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  The distillate storage tank accepts twice the hourly capacity of the still.  Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn. Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Evaporator easily accessible for cleaning purposes .  Condenser (cooling coil) inside the storage tank, easily exchangeable.  Distillate withdrawal through drain cock with continuous and touch position.  CO2 degassing through outlet in the condenser.  Heating element, evaporator, storage tank and condenser made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 8 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Storage tank capacity 16 l Cooling water required approx. 72 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 780 x 410 x 540 mm Electrical connection 400 V / 50...60 Hz / 6.0 kW 3 Ph/N/PE three-phase-current ** Net weight approx. 30.7 kgs Gross weight (cardboard box) approx. 41.0 kgs Gross weight (wooden case) approx. 50.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single Distillation Water Still 2012

Specifications and features  Power supply through included mains cable (without plug).   Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.  Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  The distillate storage tank accepts twice the hourly capacity of the still.  Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.  Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Evaporator easily accessible for cleaning purposes .  Condenser (cooling coil) inside the storage tank, easily exchangeable.  Distillate withdrawal through drain cock with continuous and touch position.  CO2 degassing through outlet in the condenser.  Heating element, evaporator, storage tank and condenser made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin. Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 12 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Storage tank capacity 24 l Cooling water required approx. 198 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 780 x 410 x 670 mm Electrical connection 400 V / 50...60 Hz / 9.0 kW 3 Ph/N/PE three-phase-current ** Net weight approx. 43.0 kgs Gross weight (cardboard box) approx. 47.0 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.48 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single Water Still 2001-2

Specifications and features  Water Still for single distillation suitable for bench mounting.  Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Evaporator easily accessible for cleaning purposes .  Destillate withdrawal through outlet at the condenser.  CO2 degassing through outlet in the condenser.   Cooling water temperature indicated through a thermometer.  Heating element, evaporator and condenser made of stainless steel.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Cooling water in- and outlet 1/2" (ø approx. 12.7 mm).  Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 2 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Cooling water required approx. 20 l / h Minimum water pressure 1 to 2 bar Exterior dimensions (W x D x H) 280 x 250 x 490 mm Electrical connection 230 V / 50...60 Hz / 2.0 kW ** Net weight approx. 7.5 kgs Gross weight (cardboard box) approx. 10.0 kgs Gross weight (wooden case) approx. 22.0 kgs Packing volume approx. 0.10 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water. ** other voltages on request Mono-Distile Grubu Cihazlari   ( Depolama tanki içermeyen modeller ) :  Bakim-gerektirmeyen,güvenilir, kullanimi kolay,masaüstü ve de depolama tanki içermeyen mono-distile kalitesinde su üreten su cihazlaridir.CE belgelidir. GFL Model 2001/2     2 lt/saat kapasiteli GFL Model 2004/4   4 lt/saat kapasiteli

Gfl Water Still - Single Water Still 2001-4

Specifications and features           Water Still for single distillation suitable for bench mounting.   Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Evaporator easily accessible for cleaning purposes.  Destillate withdrawal through outlet at the condenser.  CO2 degassing through outlet in the condenser.  Cooling water temperature indicated through a thermometer.  Heating element, evaporator and condenser made of stainless steel.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Cooling water in- and outlet 1/2" (ø approx. 12.7 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 4 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Cooling water required approx. 40 l / h Minimum water pressure 1 to 2 bar Exterior dimensions (W x D x H) 280 x 250 x 490 mm Electrical connection 230 V / 50...60 Hz / 3.0 kW ** Net weight approx. 7.5 kgs Gross weight (cardboard box) approx. 10.0 kgs Gross weight (wooden case) approx. 22.0 kgs Packing volume approx. 0.10 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

GFL Derin Dondurucu

Gfl Deep Freezer - Chest Freezer 6340

Specifications and features         User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications         Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range ± 0 °C to -40 °C Capacity 70 l Inner dimensions (W x D x H) 600 x 350 x 340 mm Overall dimensions A (W x D x H) 836 x 685 x 1055 mm Outside dimensions B (W x D x H) 836 x 585 x 985 mm Electrical connection 230 V / 50 Hz / 0.6 kW (other voltages and frequencies on request) Net weight approx. 100 kgs Packing volume 1.1 m3 The individual overall dimensions (A) are the actual dimensions of the unit. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Chest Freezer 6341

Specifications and features       User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W. Applications       Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range ± 0 °C bis -40 °C Capacity 30 l Inner dimensions (W x D x H) 500 x 305 x 200 mm Overall dimensions A (W x D x H) 700 x 600 x 905 mm Outside dimensions B (W x D x H) 700 x 500 x 835 mm Electrical connection 230 V / 50 Hz / 0.6 kW (other voltages and frequencies on request) Net weight approx. 70 kgs Packing volume 0.6 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed

Gfl Deep Freezer - Chest Freezer 6342

Specifications and features   User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications    Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range ± 0 °C bis -40 °C Capacity 100 l Inner dimensions (W x D x H) 710 x 440 x 340 mm Overall dimensions A (W x D x H) 960 x 790 x 1080 mm Outside dimensions B (W x D x H) 960 x 690 x 1000 mm Electrical connection 230 V / 50 Hz / 0.6 kW (other voltages and frequencies on request) Net weight approx. 180 kgs Packing volume 1.9 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed

Gfl Deep Freezer - Chest Freezer 6343

Specifications and features       User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Additional insulating covers on the cabinet. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications       Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range ± 0 °C bis -40 °C Capacity 220 l Inner dimensions (W x D x H) 840 x 460 x 580 mm Overall dimensions A (W x D x H) 1450 x 870 x 1040 mm Outside dimensions B (W x D x H) 1450 x 770 x 1040 mm Electrical connection 230 V / 50 Hz / 0.6 kW (other voltages and frequencies on request) Net weight approx. 210 kgs Packing volume 3.0 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Chest Freezer 6344

Specifications and features      User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Additional insulating covers on the cabinet. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications       Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range ± 0 °C bis -40 °C Capacity 300 l Inner dimensions (W x D x H) 1000 x 500 x 600 mm Overall dimensions A (W x D x H) 1610 x 910 x 1060 mm Outside dimensions B (W x D x H) 1610 x 810 x 1060 mm Electrical connection 230 V / 50 Hz / 0.6 kW (other voltages and frequencies on request) Net weight approx. 240 kgs Packing volume 3.0 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Chest Freezer 6345

Specifications and features      User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Additional insulating covers on the cabinet. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.    Applications       Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range ± 0 °C bis -40 °C Capacity 500 l Inner dimensions (W x D x H) 1440 x 580 x 600 mm Overall dimensions A (W x D x H) 2060 x 1000 x 1060 mm Outside dimensions B (W x D x H) 2060 x 900 x 1060 mm Electrical connection 230 V / 50 Hz / 0.6 kW (other voltages and frequencies on request) Net weight approx. 310 kgs Packing volume 3.4 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Chest Freezer 6380

Specifications and features        User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W. Applications       Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range -50 °C bis -85 °C Capacity 70 l Inner dimensions (W x D x H) 600 x 350 x 340 mm Overall dimensions A (W x D x H) 836 x 685 x 1055 mm Outside dimensions B (W x D x H) 836 x 585 x 985 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 120 kgs Packing volume 1.1 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is opened. (All designs are subject to change without notice)

Gfl Deep Freezer - Chest Freezer 6381

Specifications and features        User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W. Applications         Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range -50 °C bis -85 °C Capacity 30 l Inner dimensions (W x D x H) 500 x 305 x 200 mm Overall dimensions A (W x D x H) 700 x 600 x 905 mm Outside dimensions B (W x D x H) 700 x 500 x 835 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 90 kgs Packing volume 0.6 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Chest Freezer 6382

Specifications and features       User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications       Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range -50 °C bis -85 °C Capacity 100 l Inner dimensions (W x D x H) 710 x 440 x 340 mm Overall dimensions A (W x D x H) 960 x 790 x 1080 mm Outside dimensions B (W x D x H) 960 x 690 x 1000 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 200 kgs Packing volume 1.9 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Chest Freezer 6383

Specifications and features         User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Additional insulating covers on the cabinet. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W. Applications Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range -50 °C bis -85 °C Capacity 220 l Inner dimensions (W x D x H) 840 x 460 x 580 mm Overall dimensions A (W x D x H) 1450 x 870 x 1040 mm Outside dimensions B (W x D x H) 1450 x 770 x 1040 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 230 kgs Packing volume 3.0 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Chest Freezer 6384

Specifications and features     User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Additional insulating covers on the cabinet. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications     Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range -50 °C bis -85 °C Capacity 300 l Inner dimensions (W x D x H) 1000 x 500 x 600 mm Overall dimensions A (W x D x H) 1610 x 910 x 1060 mm Outside dimensions B (W x D x H) 1610 x 810 x 1060 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 260 kgs Packing volume 3.0 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Chest Freezer 6385

Specifications and features         User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Additional insulating covers on the cabinet. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.        Applications         Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range -50 °C bis -85 °C Capacity 500 l Inner dimensions (W x D x H) 1440 x 580 x 600 mm Overall dimensions A (W x D x H) 2060 x 1000 x 1060 mm Outside dimensions B (W x D x H) 2060 x 900 x 1060 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 330 kgs Packing volume 3.4 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension after removing the lock and the lid hinges, the cable connection and the connector for the safety cooling system, the chart recorder, the power switch and the control panel; with the hight dimensions referring to when the lid is removed.

Gfl Deep Freezer - Upright Freezer 6443

Specifications and features          User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Equipped with three inside compartments (high 353 mm), each provided with an insulating door to prevent any loos of cold air. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W. Applications         Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range ± 0 °C bis -40 °C Capacity 300 l Inner dimensions (W x D x H) 600 x 450 x 1100 mm Overall dimensions A (W x D x H) 990 x 865 x 1940 mm Outside dimensions B (W x D x H) 916 x 785 x 1940 mm Electrical connection 230 V / 50 Hz / 0.6 kW (other voltages and frequencies on request) Net weight ca. 240 kg Packing volume 2.8 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the width dimensions after removing the lock and to the depth dimensions without the cable connection and the connector of the safety cooling system, the chart recorder, power switch and the control panel.

Gfl Deep Freezer - Upright Freezer 6445

Specifications and features  User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Equipped with three inside compartments (high 353 mm), each provided with an insulating door to prevent any loos of cold air. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W. Applications       Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range ± 0 °C bis -40 °C Capacity 500 l Inner dimensions (W x D x H) 600 x 760 x 1100 mm Overall dimensions A (W x D x H) 990 x 1175 x 1940 mm Outside dimensions B (W x D x H) 916 x 1095 x 1940 mm Electrical connection 230 V / 50 Hz / 0.6 kW (other voltages and frequencies on request) Net weight approx. 310 kgs Packing volume 3.5 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the width dimensions after removing the lock and to the depth dimensions without the cable connection and the connector of the safety cooling system, the chart recorder, power switch and the control panel.  

Gfl Deep Freezer - Upright Freezer 6481

Specifications and features         Undercounter (for easy integration into a laboratory bench) or stand-alone User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. Equipped with three drawers (height 155, 160, 165 mm). The magnetic sealing system reliably prevents freezing of the door seals. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications         Optimal applicable for a safe long-term and temperature-protected trouble-free storage of cell lines, human, animal and plant tissues, fractions of blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi direct at the workplace. Technical details Temperature range -50 °C to -85 °C Capacity 96 l Inner dimensions (W x D x H) 430 x 430 x 510 mm Overall dimensions A (W x D x H) 900 x 770 x 890 mm Outside dimensions B (W x D x H) 900 x 750 x 865 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 150 kgs Packing volume 1,1 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the depth dimension, after removing the door, the cable connection and the housing of the control panel, and to the height with the cover plate removed. The Upright Freezer requires a distance of at least 60 mm from other units or walls, thus providing sufficient cooling air supply.

Gfl Deep Freezer - Upright Freezer 6483

Specifications and features         User-friendly microprocessor technique Comfortable control panel with digital display to enter and read out all security-relevant data. Adjustable alarm limits for over- and under-temperatures (0 - 20 K) Additional control and alarm options, individually settable for different user applications. Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance). Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system. RS 232 serial interface for trouble-free data transfer. Inside cabinet made completely of stainless steel and ex-proof. The magnetic sealing system reliably prevents freezing of the door seals. Equipped with three inside compartments (high 353 mm), each provided with an insulating door to prevent any loos of cold air. Wide range of accessories. Custom-made solutions on request. Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications         Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range -50 °C bis -85 °C Capacity 300 l Inner dimensions (W x D x H) 600 x 450 x 1100 mm Overall dimensions A (W x D x H) 990 x 865 x 1940 mm Outside dimensions B (W x D x H) 916 x 785 x 1940 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 270 kgs Packing volume 2.8 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the width dimensions after removing the lock and to the depth dimensions without the cable connection and the connector of the safety cooling system, the chart recorder, power switch and the control panel.

Gfl Deep Freezer - Upright Freezer 6485

Specifications and features   User-friendly microprocessor technique   Comfortable control panel with digital display to enter and read out all security-relevant data.  Adjustable alarm limits for over- and under-temperatures (0 - 20 K)  Additional control and alarm options, individually settable for different user applications.  Maintains all display and alarm functions for 60 hours in case of a power failure (accumulator time allowance).  Electronic alarm device and potential-free contact for connection to an internal alarm system, or to the central I&C system.  RS 232 serial interface for trouble-free data transfer.  Inside cabinet made completely of stainless steel and ex-proof.  The magnetic sealing system reliably prevents freezing of the door seals.  Equipped with three inside compartments (high 353 mm), each provided with an insulating door to prevent any loos of cold air.  Wide range of accessories. Custom-made solutions on request.  Energy-saving, maintenance-free cooling unit. Both the non-flammable refrigerant and the all-around special insulation (up to 150 mm) are CFC-free. The heat emission is only approx. 400 W.  Applications            Only a safe temperature protection ensures trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi. Technical details Temperature range -50 °C bis -85 °C Capacity 500 l Inner dimensions (W x D x H) 600 x 760 x 1100 mm Overall dimensions A (W x D x H) 990 x 1175 x 1940 mm Outside dimensions B (W x D x H) 916 x 1095 x 1940 mm Electrical connection 230 V / 50 Hz / 1.2 kW (other voltages and frequencies on request) Net weight approx. 340 kgs Packing volume 3.5 m3 The overall dimensions (A) given here are the actual dimensions. The outside dimensions (B) given here refer to the width dimensions after removing the lock and to the depth dimensions without the cable connection and the connector of the safety cooling system, the chart recorder, power switch and the control panel.

GFL Inkübatör

Gfl Incubator - Hybridisation Incubator 7601

Specifications and features          Microprocessor-controlled temperature regulation.   Very good temperature constancy of ± 0.5 °C.  Optimum temperature distribution throughout the cabinet interior by fan circulation.  Electronic monitoring of the temperature regulator triggers visual alarm in case of fault. The heating is switched off, the cause of the fault is reported in the LED display.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Thermostatic over-temperature cut-out to protect the heating element.  Soft touch keys with characteristic symbols.  High resolutions of the detections and even results due to the constancy of 12 rpm.  Variable rotating rack, max. capacity 16 hybridisation tubes.  Removable rotating rack, can be replaced by up to 5 tilt resistant and extricable perforated trays.  Key to switch on two cabinet lamps.  Interior parts of the unit and the rotating rack made of stainless steeel.  Housing made of electrolytically galvanised sheet steel, powder-coated.  Clear view of the interior cabinet through a large acrylic glass window.  2 clip wheels 7940, 4 bottles 7945 as well as 8 spring clips 7937 are in the standard scope of supply.   Applications            Due to the small quantity of necessary hybridisation liquid it is possible to work with a high concentration of probes or antibodies. Therefore, the Hybridisation Incubator 7601 is considered as the ideal unit for exact hybridisations of DNA and RNA probes with nucleic acid on filter paper and for incubations of protein blots with antibodies. Technical details Temperature range approx. 8 °C above ambient temperature to +99.9 °C Temperature constancy (temporal) ± 0.5 °C Rotations speed of the rotating rack 12 / min., fix Cabinet illumination 2 lamps at 15 W Interior dimensions (W x D x H) 400 x 330 x 380 mm Exterior dimensions (W x D x H) 540 x 630 x 670 mm Electrical connection 230V ±10% / 50...60 Hz / 0.55 kW * Net / gross weight 45.0 kgs / 54.0 kgs Packing volume approx. 0.51 m3 * other voltages and frequencies on request GFL MODEL 7601 HIBRIDIZASYON INKÜBATÖRÜ : Bu cihaz DNA-RNA problarinin filtreli kagit üzerinde nükleid asitle gerçek hibridizasyonlari ve protein blotlarinin antibodylerle inkübasyonu için idealdir.Sabit 12 rpm devirde rotasyon hareketi ile hibridizasyon siselerini döndürebilmektedir.Tek seferde 16 adet hibridizasyon sisesi yerlestirilebilmektedir.Inkübasyon isisi ortam sicakliginin 8 derece üzeri ile 99.9 C arasinda ayarlanabilmektedir.

Gfl Incubator - Mini Incubator 4010

Specifications and features   Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.2 °C temporal.  Optimum temperature distribution throughout the cabinet interior by fan circulation.  Exact reproducibility of the set value by fast and exact temperature setting.  Electronic monitoring of the temperature regulator triggers visual alarm in case of fault. The heating is switched off, the cause of the fault is reported in the LED display.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Thermostatic over-temperature cut-out to protect the heating element.  Soft touch keys with characteristic symbols.  Compact build, little space required for versatile aplications directly on the workbench.  Perforated tray and bottom tray are made of stainless steel.  Lift-up acrylic glass cover.   Housing made of electrolytically galvanised sheet steel, powder-coated.  Applications            Mini Incubator 4010 is most suitable for incubations that demand exactly reproducible temperatures as well as for tempering, warming and drying of samples. The lift-up, see-through acrylic cover permits a clear view of the cultures in the interior cabinet. Technical details Temperature range approx. 8 °C über Raumtemperatur bis +60 °C Temperature constancy (temporal) ± 0.2 °C Volume approx. 12 l Maximum load 5 kgs Interior dimensions (W x D x H) 230 x 310 x 170 mm Exterior dimensions (W x D x H) 280 x 510 x 280 mm Electrical connection 230 V / 50...60 Hz / 0.3 kW * Net / gross weight 9.9 kgs / 11.8 kgs Packing volume approx. 0.11 m3 * other voltages and frequencies on request GFL MODEL 4010 MINI INKÜBATÖR : 12 lt kapasiteli, cam kapakli, ve 60 C ‘ye kadar numune ve kültür kaplarinin isitlmasi ve kurutulmasi amaciyla kullanilmaktadir. Isi stabilitesi 0.2 C ‘dir.

Gfl Incubator - Mini Tube Roller Incubator 4020

Specifications and features           Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.2 °C temporal.   Optimum temperature distribution throughout the cabinet interior by fan circulation.   Exact reproducibility of the set value by fast and exact temperature setting.   Electronic monitoring of the temperature regulator triggers visual alarm in case of fault. The heating is switched off, the cause of the fault is reported in the LED display.   Digital temperature readout and setting via LED display, in steps of 0.1 °C.   Thermostatic over-temperature cut-out to protect the heating element.   Soft touch keys with characteristic symbols.   Removable bottle rotating device made of stainless steel with four parallel rotating axles.   Easily displaceable outer axles for accomodation of bottles with different diameters.   Compact build, little space required for versatile aplications directly on the workbench.   Lift-up acrylic glass cover.   Housing made of electrolytically galvanised sheet steel, powder-coated.   Applications            Universally applicable for incubations and hybridisations: Mini Tube Roller Incubator 4020. Due to its constant rotation speed of 12 rpm, it provides even results and high resolutions of the detections even when in continuous use. The lift-up, see-through acrylic cover permits a clear view of the cultures in the interior cabinet.  Technical details Temperature range approx. 8 °C above ambient temperature to +60 °C Temperature constancy (temporal) ± 0.2 °C Volume approx. 10 l Shaking motion rotating Frequency 12 rpm., fixed Maximum load 3 kgs Interior dimensions (W x D x H) 230 x 300 x 140 mm Exterior dimensions (W x D x H) 280 x 510 x 280 mm Electrical connection 230 V / 50...60 Hz / 0.3 kW * Net / gross weight 11.8 kgs / 13.7 kgs Packing volume approx. 0.11 m3 * other voltages and frequencies on request GFL MODEL 4020 MINI TÜP ROLLER INKÜBATÖRÜ :  Inkübasyon ve hibridizasyon amaçli kullanilabilmekte, 12 rpm sabit hizda tüpleri döndürebilen yaklasik 10 lt kapasiteli, cm kapakli küçük bir inkübatördür.

Gfl Incubator - Shaking Incubator 3031

Specifications and features            Microprocessor-controlled temperature regulation, PID type.   Excellent temperature constancy: ± 0.2 °C temporal. Optimum temperature distribution throughout the cabinet interior by fan circulation. Electronic monitoring of the temperature regulator triggers visual alarm in case of fault. The heating is switched off, the cause of the fault is reported in the LED display.  Adjustable limits for over- and under-temperatures alarms (optical and audible).  Microprocessor-controlled timer displays continuously the current remaining running time of the incubation time and signals acoustically its expiry.  Fast and exact temperature setting, exact reproducibility of set values, such as temperature, shaking frequency and incubation time.  Soft touch keys with characteristic symbols.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  RS 232 serial interface for trouble-free data transfer.  Built-in cooling coil for applications below ambient temperature as a standard scope of supply.  Silent and robust shaking mechanism with gentle start-up.  Shaking platform made of anodised aluminium, equipped with four plastic pins for secure attachment of shaking tray 3966 or universal mount 3967 (accessories).  Housing made of heavy-duty acrylic glass cover (ABS) and powder-coated, electrolitically galvanised sheet steel.  Lift-up acrylic glass cover.  Applications            Shaking Incubator 3031 is used for applications that require exactly reproducible circular motion and temperatures up to 70 °C. It is preferred by standard and research laboratories for incubations, fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies, as well as for cultivating bacteria cultures. Technical details Temperature range approx. 8 °C above ambient temperature to +70°C Temperature range (operation with cooling coil) +20 °C to +70 °C * Temperature constancy (temporal) ± 0.2 °C Shaking motion orbital, can be switched on and off Shaking frequency 10 - 250 rpm Shaking amplitude 30 mm Maximum load 12 kgs Timer 1 minute to 999 hours Volume/ Capacity approx. 46 l / 1 shaking tray Inner dimensions (W x D x H) 450 x 450 x 280 mm Exterior dimensions (W x D x H) 525 x 665 x 570 mm Electrical connection 230 V / 50...60 Hz / 0.8 kW ** Net / gross weight 38.5 kg / 50.0 kg Packing volume approx. 0.51 m3 * depending of cooling medium and ambient temperature GFL MARKA ÇALKALAMALI INKÜBATÖRLER : Mikroprosesör kontrollü, hassas çalkalama islemleri için uygun 70C ‘ye isitma yapilabilen 3 ayri modeli mevcuttur. GFL Model 3031         orbital çalkalamali,46 lt kapasiteli ,tek çalkalama tablali,max. yükleme                                    kapasitesi : 12 kg olan modeldir. GFL Model 3032         orbital çalkalamali, 45 lt kapasiteli , max . 2 çalkalama tablasi                                    yerlestirilebilen ,etüv tipinde , cam gözlem kapakli, max yükleme kapasitesi: 12 kg olan modeldir. GFL Model 3033         orbital çalkalamali, 150 lt kapasiteli , max . 2 çalkalama tablasi                                    yerlestirilebilen ,etüv tipinde , çift kapili ve gözlem kapakli, max                                    yükleme kapasitesi: 20 kg olan modeldir.

Gfl Incubator - Shaking Incubator 3032

Specifications and features          Microprocessor-controlled temperature regulation, PID type.   Excellent temperature constancy: ± 0.2 °C temporal.   Optimum temperature distribution throughout the cabinet interior by fan circulation.   Electronic monitoring of the temperature regulator triggers visual alarm in case of fault. The heating is switched off, the cause of the fault is reported in the LED display.   Adjustable limits for over- and under-temperatures alarms (optical and audible).   Microprocessor-controlled timer displays continuously the current remaining running time of the incubation time and signals acoustically its expiry.   Fast and exact temperature setting, exact reproducibility of set values, such as temperature, shaking frequency and incubation time. Soft touch keys with characteristic symbols.   Digital temperature readout and setting via LED display, in steps of 0.1 °C.   RS 232 serial interface for trouble-free data transfer.   Built-in cooling coil for applications below ambient temperature as a standard scope of supply.   Silent and robust shaking mechanism with gentle start-up.   Interior cabinet, the inside of the doors and the shaking platform made of stainless steel.   Housing made of electrolytically galvanised sheet steel, powder-coated.   Fluorescent lamp for daylight simulation.   Frame able to accomodate two shaking trays is part of the standard scope of supply.  Applications            Shaking Incubator 3032 is used for applications that require exactly reproducible circular motion and temperatures up to 70 °C. It is preferred by standard and research laboratories for incubations, fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies, as well as for cultivating bacteria cultures. Technical details Temperature range approx. 8 °C above ambient temperature to +70°C Temperature range (operation with cooling coil) +20 °C to +70 °C * Temperature constancy (temporal) ± 0.2 °C Shaking motion orbital, can be switched on and off Shaking frequency 10 - 250 rpm Shaking amplitude 25 mm Maximum load 12 kgs Timer 1 minute to 999 hours Volume/ Capacity approx. 45 l / 2 shaking trays ** Inner dimensions (W x D x H) 450 x 300 x 320 mm Exterior dimensions (W x D x H) 710 x 650 x 710 mm Electrical connection 230 V / 50...60 Hz / 0.8 kW *** Net / gross weight 70.0 kgs / 80.0 kgs Packing volume approx. 0.86 m3 * depending of cooling medium and ambient temperature

Gfl Incubator - Shaking Incubator 3033

Specifications and features         Microprocessor-controlled temperature regulation, PID type.   Excellent temperature constancy: ± 0.2 °C temporal.  Optimum temperature distribution throughout the cabinet interior by fan circulation.  Electronic monitoring of the temperature regulator triggers visual alarm in case of fault. The heating is switched off, the cause of the fault is reported in the LED display.  Adjustable limits for over- and under-temperatures alarms (optical and audible).  Microprocessor-controlled timer displays continuously the current remaining running time of the incubation time and signals acoustically its expiry.  Fast and exact temperature setting, exact reproducibility of set values, such as temperature, shaking frequency and incubation time.  Soft touch keys with characteristic symbols.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  RS 232 serial interface for trouble-free data transfer.  Built-in cooling coil for applications below ambient temperature as a standard scope of supply.  Silent and robust shaking mechanism with gentle start-up.  Interior cabinet, the inside of the doors and the shaking platform made of stainless steel.   Housing made of electrolytically galvanised sheet steel, powder-coated.  Fluorescent lamp for daylight simulation.  Frame able to accomodate two shaking trays is part of the standard scope of supply.  Applications            Shaking Incubator 3033 is used for applications that require exactly reproducible circular motion and temperatures up to 70 °C. It is preferred by standard and research laboratories for incubations, fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies, as well as for cultivating bacteria cultures. Technical details Temperature range approx. 8 °C above ambient temperature to +70°C Temperature range (operation with cooling coil) +20 °C to +70 °C * Temperature constancy (temporal) ± 0.2 °C Shaking motion orbital, can be switched on and off Shaking frequency 10 - 250 rpm ** Shaking amplitude 25 mm Maximum load 20 kgs Timer 1 minute to 999 hours Volume/ Capacity approx. 150 l / 2 shaking trays *** Inner dimensions (W x D x H) 674 x 540 x 430 mm Exterior dimensions (W x D x H) 930 x 890 x 820 mm Electrical connection 230 V / 50...60 Hz / 0.8 kW **** Net / gross weight 135.0 kg / 270.0 kg Packing volume approx. 1.74 m3 (wooden case) * depending of cooling medium and ambient temperature

Su Banyosu

Gfl Water Bath - Incubation Inactivation Bath 1002

Specifications and features  Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath.  Applications            The Water Bath is successfully used for incubations and inactivations of cultures, such as e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples. Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 7 l Interior dimensions (W x D x working height) 245 x 200 x 145 mm Exterior dimensions (W x D x H) 325 x 395 x 255 mm Electrical connection 230 V / 50...60 Hz / 1.0 kW * Net / gross weight approx. 8.0 / 10.5 kgs Packing volume approx. 0.11 m3       * other voltages and frequencies on request Inkübasyon / Inaktivasyon Banyolari : GFL Model 1002                kapasite : 7 lt     GFL Model 1003                kapasite :14 lt   GFL Model 1004                kapasite :21 lt   GFL Model 1005                kapasite :40 lt   GFL Model 1008                kapasite :20 lt   GFL Model 1012                kapasite : 7 lt ; sirkülasyon sistemli   GFL Model 1013                kapasite :14 lt ; sirkülasyon sistemli

Gfl Water Bath - Incubation Inactivation Bath 1003

Specifications and features Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.   Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples. Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 14 l Interior dimensions (W x D x working height) 400 x 245 x 145 mm Exterior dimensions (W x D x H) 485 x 440 x 255 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 12.0 / 15.0 kgs Packing volume approx. 0.13 m3 * other voltages and frequencies on request  

Gfl Water Bath - Incubation Inactivation Bath 1004

Specifications and features Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples, as well as for heating up medical compresses/hot packs. Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 21 l Interior dimensions (W x D x working height) 600 x 245 x 145 mm Exterior dimensions (W x D x H) 685 x 440 x 255 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 15.0 / 21.0 kgs Packing volume approx. 0.26 m3 * other voltages and frequencies on request

Gfl Water Bath - Incubation Inactivation Bath 1008

Specifications and features  Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 20 l Interior dimensions (W x D x working height) 400 x 245 x 205 mm Exterior dimensions (W x D x H) 485 x 440 x 315 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 13.0 / 16.0 kgs Packing volume approx. 0.13 m3 * other voltages and frequencies on request

Gfl Water Bath - Incubation Inactivation Bath 1013

Specifications and features  Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Excellent temperature uniformity in the whole bath through built-in circulation system.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel, Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated. Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 14 l Interior dimensions (W x D x working height) 400 x 245 x 145 mm Exterior dimensions (W x D x H) 485 x 440 x 315 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 12.0 / 16.0 kgs Packing volume approx. 0.13 m3 * other voltages and frequencies on request

Gfl Water Bath - Multiple Water Bath 1041

Specifications and features           Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  The openings in the lid are covered by heat-resistant plastic 6-part ring sets.  Bath interior, heating element, frame with openings and 2-part perforated floor plate above the heating element are made of stainless steel.  Housing made of electrolytically galvanised sheet steel, powder-coated.  Adjustable water level regulator 1919 available as a standard scope of supply. Applications            Especially suitable when particular requirements to quality and quantity have to be met, e. g. for gentle multiple steaming work from columns, Erlenmeyer flasks or beakers.  Technical details   Temperature range approx. 5 °C above ambient temperature to +99.9 °C Openings with sets of rings 4 ø of the openings 130 mm Working height 90 mm Exterior dimensions (W x D x H) 682 x 232 x 190 mm Electrical connection 230 V / 50...60 Hz / 1.0 kW * Net / gross weight approx. 12.0 / 15.0 kgs Packing volume approx. 0.12 m3 * other voltages and frequencies on request  

Gfl Water Bath - Multiple Water Bath 1042

Specifications and features  Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  The openings in the lid are covered by heat-resistant plastic 6-part ring sets.  Housing made of electrolytically galvanised sheet steel, powder-coated.  Bath interior, heating element, frame with openings and 2-part perforated floor plate above the heating element are made of stainless steel.  Adjustable water level regulator 1919 available as a standard scope of supply. Applications            Especially suitable when particular requirements to quality and quantity have to be met, e. g. for gentle multiple steaming work from columns, Erlenmeyer flasks or beakers.   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Openings with sets of rings 6 ø of the openings 130 mm Working height 90 mm Exterior dimensions (W x D x H) 982 x 232 x 190 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 16.0 / 20.0 kgs Packing volume approx. 0.15 m3 * other voltages and frequencies on request

Gfl Water Bath - Tissue Float Bath 1052

Specifications and features  Very good temperature constancy of ± 0.5 °C.   Exact temperature control guarantees evenly stretched cut tissues which are clearly visible in the bath.  Careful drying of the cut tissues on the warmed rim of the bath. The low 100 mm height of the bath allows compfortable and safe working.  Bath interior made of aluminium, black anodised.  Housing made of aluminium, powder-coated.  With temperature controller and scale, main switch and two pilot lamps.  Control thermometer fixed to the rim of the bath. Applications            This special bath is preferably used for stretching and drying cut tissues in histological, pathological, chemical, clinical and bacteriological laboratories.   Technical details Temperature range approx. 5 °C above ambient temperature to +80 °C Interior dimensions ø / H mm 200/60 Overall dimensions ø / H mm 280/100 Electrical connection 230 V / 50...60 Hz / 0.3 kW * Net / gross weight approx. 2.0 / 5.0 kgs Packing volume approx. 0.03 m3 * other voltages and frequencies on request GFL Model 1052 Organ Banyosu  : Kesili dokularin dikkatli bir sekilde kurutulmasi için özel olarak üretilmis modeldir. Histoloji,patoloji,kimya,klinik ve bakteriyolojik laboratuarlarinda kullanima uygundur.  

Gfl Water Bath - Water Bath for Evaporation 1023

Specifications and features  Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  Removable square cover plate (W 265 mm x D 265 mm).  9-part ring set made of heat-resistant plastic. The diametre of the opening can be varied in approx. 20 mm steps.  Heating element, bath interior, frame and perforated floor above the heating element are made of stainless steel.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  The adjustable water level regulator 1919 as well as the 9-part ring set are included in the standard scope of supply. Applications            For gentle steaming work with Erlenmeyer flasks and beakers.   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Capacity approx. 7 l ø of the openings min. 45.5 / max. 194.0 mm Interior dimensions (W x D x working height) 240 x 240 x 120 mm Exterior dimensions (W x D x H) 342 x 342 x 180 mm Electrical connection 230 V / 50...60 Hz / 1.0 kW * Net / gross weight approx. 9.0 / 12.0 kgs Packing volume approx. 0.10 m3 * other voltages and frequencies on request   GFL Model 1023 Evaporasyon Banyosu : Erlen flasklar veya beherlerde evaporasyon islemi için uygun ring sistemli kapakli olup, 7 lt kapasitede ve de sicaklik ayari ortam sicakliginin 5 C üzeri ile 99.9 C arasinda ayarlanabilmektedir.

Gfl Water Bath - Water Baths for Fume Hood 1031

Specifications and features   Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  The openings in the lid are covered by heat-resistant plastic 4-part ring sets.  Bath interior, heating element, removable recessed lid and perforated floor cover above the heating element are made of stainless steel. Adjustable water level regulator 1919 available as a standard scope of supply.  Four non-slip plastic feet ensure best stability. Applications            For gentle steaming work with Erlenmeyer flasks, beakers, etc. This special bath is also preferred for the protected use in fume hoods (digestories).   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Openings with sets of rings 6 ø of the openings 90 mm Working height 100 mm Exterior dimensions (W x D x H) 430 x 300 x 155 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 6.1 / 7.4 kgs Packing volume approx. 0.05 m3 * other voltages and frequencies on request     Çekerocak için özel Banyolar : GFL Model 1031     6 ring sistemli banyo GFL Model 1032     8 ring sistemli banyo  

Gfl Water Bath - Water Baths for Fume Hood 1032

Specifications and features          Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  The openings in the lid are covered by heat-resistant plastic 4-part ring sets. Bath interior, heating element, removable recessed lid and perforated floor cover above the heating element are made of stainless steel. Adjustable water level regulator 1919 available as a standard scope of supply.  Four non-slip plastic feet ensure best stability. Applications            For gentle steaming work with Erlenmeyer flasks, beakers, etc. This special bath is also preferred for the protected use in fume hoods (digestories).   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Openings with sets of rings 6 ø of the openings 90 mm Working height 100 mm Exterior dimensions (W x D x H) 430 x 300 x 155 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 6.1 / 7.4 kgs Packing volume approx. 0.05 m3 * other voltages and frequencies on request

Gfl Water Bath - Incubation Inactivation Bath 1005

Specifications and features  The Water Bath is especially made to heat up medical compresses and hot packs.   Microprocessor-controlled temperature regulation.  Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections. Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Cover and perforated tray included as standard scope of supply. Water bath 1005 is supplied without perforated tray when ordered with rack 1923 (accessory).  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for heating up medical compresses/hot packs as well as for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples. Technical details approx. 5 °C above ambient temperature to +99.9 °C approx. 3 °C above tap water temperatur to +99.9 °C approx. 40 l 410 x 296 x 325 mm 495 x 490 x 445 mm 230 V / 50...60 Hz / 1.5 kW * approx. 21.0 / 28.0 kgs approx. 0.30 m3

Gfl Water Bath - Incubation Inactivation Bath 1012

Specifications and features          Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Excellent temperature uniformity in the whole bath through built-in circulation system.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply. Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.   Technical details approx. 5 °C above ambient temperature to +99.9 °C approx. 3 °C above tap water temperatur to +99.9 °C approx. 7 l 245 x 200 x 145 mm 325 x 395 x 315 mm 230 V / 50...60 Hz / 1.0 kW * approx. 8.0 / 12.0 kgs approx. 0.11 m3