ATAGO

Digital Refractometers RX-α series

Automatic Digital Refractometer RX-5000i-Plus

The most accurate refractometer in the world is now even more stylish, smart, and functional. Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze. The RX-5000i-Plus measures with the same accuracy level as the RX-5000α-Plus - ±0.010% Brix and ±0.00002 nD. The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-5000i-Plus Cat.No.3275 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32422 to 1.58000 Brix : 0.000 to 100.000% (5 to 75°C ATC) ResolutionRefractive index (nD) : 0.00001 Brix : 0.005% Temperature: 0.01°C Measurement AccuracyRefractive index (nD) : ±0.00002 Brix : ±0.010% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C RepeatabilityRefractive index (nD) : ±0.00001 Brix : ±0.010% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C Temperature control range5.00 to 75.00°C (No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature) Power SupplyAC100V to 240V, 50/60Hz Dimensions & Weight37×26×14cm, 6.6kg (Main Unit only) Power consumption90VA ModeMODE-1:Displays the measurement value once the sample reaches the target temperature. MODE-2:Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3:The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S:Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer -USB Warranty2 years standard (3 years with product registration) excluding touchscreen

Automatic Digital Refractometer RX-5000i

The most accurate refractometer in the world is now even more stylish, smart, and functional. Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze. The RX-5000i measures with the same accuracy level as the RX-5000α ±0.03% Brix and ±0.00004 nD. The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-5000i Cat.No.3276 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32422 to 1.58000 Brix : 0.00 to 100.00% (5 to 75°C ATC) ResolutionRefractive index (nD) : 0.00001 Brix : 0.01% Temperature: 0.01°C Measurement AccuracyRefractive index (nD) : ±0.00004 Brix : ±0.03% *When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C RepeatabilityRefractive index (nD) : ±0.00002 Brix : ±0.01% *When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C Temperature control range5.00 to 75.00°C (No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature) Power SupplyAC100V to 240V, 50/60Hz Dimensions & Weight37×26×14cm, 6.6kg (Main Unit only) Power consumption90VA ModeMODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer -USB Warranty2 years standard (3 years with product registration) excluding touchscreen

Automatic Digital Refractometer RX-7000i

Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze. The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability. The RX-7000i features an even wider refractive index range than its predecessor. This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-7000i Cat.No.3279 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32422 to 1.70000 Brix : 0.00 to 100.00% (5 to 75°C ATC) ResolutionRefractive index (nD) : 0.00001 (0.0001)* Brix : 0.01% (0.1%)* Temperature: 0.01°C *Factory default setting Measurement AccuracyRefractive index (nD) : ±0.0001 Brix : ±0.1% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C RepeatabilityRefractive index (nD) : ±0.00005 Brix : ±0.02% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C Temperature control range5.00 to 75.00°C (No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature) Power SupplyAC100V to 240V, 50/60Hz Dimensions & Weight37×26×14cm, 7.0kg (Main Unit only) Power consumption90VA ModeMODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer -USB Warranty2 years standard (3 years with product registration) excluding touchscreen

Automatic Digital Refractometer RX-9000i

Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze. The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability. The RX-9000i features both high accuracy and wide measurement range. This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-9000i Cat.No.3278 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32422 to 1.70000 Brix : 0.00 to 100.00% (5 to 75°C ATC) ResolutionRefractive index (nD) : 0.00001 Brix : 0.01% Temperature : 0.01°C Measurement Accuracy (nD)±0.00004 (nD 1.33299 to1.42009 at 10.00 to 30.00°C) ±0.00010 (For ranges other than the above) Measurement Accuracy Brix±0.03% (Brix 0.00 to 50.00% at 10.00 to 30.00°C) ±0.05% (Brix 50.01 to 95.00% at 10.00 to 30.00°C) ±0.10% (For ranges other than the above, with Sucrose solution by MODE-1) Repeatability (nD)±0.00002 (nD 1.33299 to1.42009 at 10.00 to 30.00°C) ±0.00005 (For ranges other than the above) Repeatability Brix±0.01% (Brix 0.00 to 50.00% at 10.00 to 30.00°C) ±0.02% (For ranges other than the above, with Sucrose solution by MODE-1) Temperature control range5.00 to 75.00°C (No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature) Power SupplyAC100V to 240V, 50/60Hz Dimensions & Weight37×26×14cm, 7.0kg (Main Unit only) Power consumption90VA ModeMODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer -USB Warranty2 years standard (3 years with product registration) excluding touchscreen

Automatic Digital Refractometer RX-5000α-Plus

The NEW RX-5000α (alpha)-Plus features improved accuracy over the RX-5000α-Plus, with Brix ±0.010 and nD ±0.00002. The RX-5000α-Plus is an automatic digital refractometer which can set measurement temperature internally and has the following features for measuring the refractive index, Brix or concentration of various liquids accurately and speedily * Since the RX-5000α-Plus has a thermo-module to control temperature, a constant temperature water bath is not necessary. * The measurement starts automatically after the sample reaches your targeted temperature. * The refractive index and Brix at your targeted temperature are speedily displayed. * High Brix ± 0.01% and refractive index ± 0.00002 accuracy can be obtained. * The RX-5000α-Plus displays the top-and-bottom-limit-bar for your set control range. * If the measurement value differs from that of your Standard Liquid or the other refractometer, it can be adjusted in a certain range. * 60 kinds of user scales can be input according to your sample. * The RX-5000α-Plus is capable of calling up 30 latest measurements. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-5000α-Plus Cat.No.3266 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32700 to 1.58000 Brix : 0.000 to 100.000% (5 to 60°C ATC) ResolutionRefractive index (nD) : 0.00001 Brix : 0.005% Temperature : 0.01°C Measurement AccuracyRefractive index (nD) : ±0.00002 Brix : ±0.010% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C RepeatabilityRefractive index (nD) : ±0.00001 Brix : ±0.010% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C Measurement Temperature5 to 60°C Power SupplyAC100V to 240V, 50/60Hz Dimensions & Weight37×26×14cm, 6.4kg (Main Unit only) Power consumption65VA ModeMODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter (optional) Warranty2 years standard (3 years with product registration)

Automatic Digital Refractometer RX-5000α

The RX-5000α (alpha) is an automatic digital refractometer which can set measurement temperature internally and has the following features for measuring the refractive index, Brix or concentration of various liquids accurately and speedily * Since the RX-5000α (alpha) has a thermo-module to control temperature, a constant temperature water bath is not necessary. * The measurement starts automatically after the sample reaches your targeted temperature. * The refractive index and Brix at your targeted temperature are speedily displayed. * High Brix ± 0.03% and refractive index ± 0.00004 accuracy can be obtained. * The RX-5000α (alpha) displays the top-and-bottom-limit-bar for your set control range. * If the measurement value differs from that of your Standard Liquid or the other refractometer, it can be adjusted in a certain range. * 60 kinds of user scales can be input according to your sample. * The RX-5000α (alpha) is capable of calling up 30 latest measurements. *Special model of RX-5000α allows pre-programming of an additional scale (such as honey moisture, inverted sugar%, salt concentration or butyro) in addition to Refractive Index and Brix (%) at customer's request. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-5000α Cat.No.3261 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32700 to 1.58000 Brix : 0.000 to 100.00% (5 to 60°C ATC) ResolutionRefractive index (nD) : 0.00001 Brix : 0.01% Temperature: 0.01°C Measurement AccuracyRefractive index (nD) : ±0.00004 Brix : ±0.03% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C RepeatabilityRefractive index (nD) : ±0.00002 Brix : ±0.01% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C Measurement Temperature5 to 60°C Power SupplyAC100V to 240V, 50/60Hz Dimensions & Weight37×26×14cm, 6.4kg (Main Unit only) Power consumption65VA ModeMODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter (optional) Warranty2 years standard (3 years with product registration)

Automatic Digital Refractometer RX-5000α-Bev

The NEW RX-5000α-Bev is a re-designed version of the conventional RX-5000α. A flat sample stage replaced the sample well to make it easier to wipe off the sample and to allow for a faster and easier clean up. The RX-5000α-Bev is ideal for measuring beverages and is equipped with all the standard features of the RX-5000α. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-5000α-Bev Cat.No.3271 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32700 to 1.58000 Brix : 0.000 to 100.00% (5 to 60°C ATC) ResolutionRefractive index (nD) : 0.00001 Brix : 0.01% Temperature: 0.01°C Measurement AccuracyRefractive index (nD) : ±0.00004 Brix : ±0.03% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C RepeatabilityRefractive index (nD) : ±0.00002 Brix : ±0.01% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C Measurement Temperature5 to 60°C Power SupplyAC100V to 240V, 50/60Hz Included AccessoriesSoftware, PolariSoft Dimensions & Weight37×26×14cm, 6.1kg (Main Unit only) Power consumption65VA ModeMODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter (optional) Warranty2 years standard (3 years with product registration)

Automatic Digital Refractometer RX-7000α

The RX-7000α (alpha) is an improved (upgraded) model for a measurement range of refractive index and measurement temperature of an RX-5000α (alpha). The thermo module for constant temperature is equipped. It is best for measuring oils and fats of high melt point, higher refractive index perfumes, organic solvents, etc. The RX-7000α (alpha) has the manual calibration facility which compensate difference in standard liquids and measurement values by other refractometers. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-7000α Cat.No.3262 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32500 to 1.70000 Brix : 0.00 to 100.00% (ATC : 5 to 70°C) ResolutionRefractive index (nD) : 0.00001 (0.0001)* Brix : 0.01% (0.1%)* Temperature: 0.01°C *Factory default setting Measurement AccuracyRefractive index (nD) : ±0.0001 Brix : ±0.1% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C RepeatabilityRefractive index (nD) : ±0.00005 Brix : ±0.02% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C Measurement Temperature5 to 70°C Power SupplyAC100V to 240V, 50/60Hz Dimensions & Weight37×26×14cm, 6.8kg (Main Unit only) Power consumption65VA ModeMODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter (optional) Warranty2 years standard (3 years with product registration)

Automatic Digital Refractometer RX-9000α

The RX-9000α is a fully automatic digital refractometer with the highest level of accuracy of its kind. Designed with a wide measurement range, measurement temperature range, and highest measurement accuracy, this instrument is suitable for multiple sample types ; such as measuring oils and fats with high melting points, aroma oils of high refractive index and organic solvents, meeting demands for high accuracy measurements. The RX-9000α has a built-in Peltier thermo module for maintaining a constant sample temperature while taking measurements. Manual calibration is also possible to adjust to standard liquid values and to correct differences in measurement values between instruments. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-9000α Cat.No.3263 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32500 to 1.70000 Brix : 0.00 to 100.00% (ATC : 5 to 70°C) ResolutionRefractive index (nD) : 0.00001 Brix : 0.01% Temperature: 0.01°C Measurement Accuracy *RepeatabilityRefractive index (nD) : ±0.00004 *±0.00002 (nD 1.33299 to1.42009 at Measurement Temperature 10.00 to 30.00°C) Refractive index (nD) : ±0.00010 *±0.00005 (For ranges other than the above) Brix±0.03% *±0.01% (Brix 0.00 to 50.00% at Measurement Temperature 10.00 to 30.00°C) Brix±0.05% (Brix 50.01 to 95.00% at Measurement Temperature 10.00 to 30.00°C) Brix±0.10% *±0.02% (For ranges other than the above, with Sucrose solut Measurement Temperature5 to 70°C Power SupplyAC100V to 240V, 50/60Hz Dimensions & Weight37×26×14cm, 6.8kg (Main Unit only) Power consumption65VA ModeMODE-1: Displays the measurement value once the sample reaches the target temperature. MODE-2: Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature. MODE-3: The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed. MODE-S: Displays the measurement value once a certain level of sample stability is achieved. Output terminals * Printer (for ATAGO digital printers) * Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter (optional) Warranty2 years standard (3 years with product registration)

Automatic Digital Refractometer RX-007α

The NEW RX-007α (alpha) is suitable for measuring water soluble samples with very low concentrations (5.000% or less) such as tea (green tea, black tea, oolong tea) and low sugar beverages at a very high accuracy of ±0.005%. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. This warranty does not cover or apply to the prism. The warranty period can be extended to three (3) years if the product is registered with ATAGO. FDA 21 CFR Part 11 Software Included in Standard Delivery. Specifications ModelRX-007α Cat.No.3921 ScaleBrix Refractive index Measurement RangeBrix : 0.000 to 5.000% Refractive index (RI) : 1.330150 to 1.341500 ResolutionBrix : 0.001% Refractive index (RI) : 0.000001 Temperature : 0.01°C Measurement AccuracyBrix : ±0.005% Refractive index (RI): 0.000010 (at 20°C) (under specified ambient temperature and constant temperature) Measurement Temperature15.00 to 30.00°C Power SupplyAC100V to 240V, 50/60Hz Included AccessoriesSoftware, PolariSoft Dimensions & Weight37×26×14cm, 6.7kg (Main Unit only) Power consumption65VA Mode2 types Output terminals * Printer (for ATAGO digital printers) * Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter (optional) Warranty2 years standard (3 years with product registration) excluding prism

Automatic Digital Refractometer RX-5000

The RX-5000 combines nozzle for connect a water bath instead of built -in thermo module.The RX-5000 is equipped with all the standard features of the RX-α series. This product comes standard with a two (2) year limited warranty against manufacturer’s defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO. Specifications ModelRX-5000 Cat.No.3281 ScaleRefractive index Brix Measurement RangeRefractive index (nD) : 1.32700 to 1.58000 Brix : 0.00 to 100.00% ResolutionRefractive index (nD) : 0.00001% Brix : 0.01% Measurement AccuracyRefractive index (nD) : ±0.00004 Brix : ±0.03% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C RepeatabilityRefractive index (nD) : ±0.00002 Brix : ±0.01% * When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C Ambient Temperature5 to 40°C Measurement Temperature5 to 60°C Power SupplyAC100V to 240V, 50/60Hz Included AccessoriesSoftware, PolariSoft Dimensions & Weight37×26×14cm, 6.4kg (Main Unit only) Power consumption30VA Output terminals * Printer output (Digital printer DP-RX is available as an Optional.) * Computer - RS-232C Connection to a USB port requires a USB to RS-232 adapter (optional) Warranty2 years standard (3 years with product registration)