HEAL FORCE

CO2 /Tri-gas Incubators

HF 100

HF 100 HF100 is a multi-gas incubator, with oxygen control function Key Points - 90℃ decontamination system - Maintenance-free zirconium oxide sensor - Precise CO2 control and immediate recovery - Constant humidity Wide range of application Innovative design for HF100 multi-gas incubator Stainless steel chamber with easy-to-clean coved corners reduces contamination-prone surface The turbulence-free chamber ventilation improves CO2, O2, humidity and temperature uniformity Innovative design of water reservoir replacing water tray, allows rapid revovery of opimal humidity Temperature control Direct heating enables rapid temperature recovery while air jacket provides isolation against ambient temperature fluctuations PT1000 temperature sensor ensures stable temperature control with little gradient and prompt temperature recovery without overheat Three temperature control settings (main heater, outer door and overheat protection)minimize condensation and yield precise temperature uniformity. Precise CO2 control and immediate recovery Drift free IR CO2 sensor responds extremely fast to gas concentration changes Auto-zero runs automatically to recover the indicator to 'zero' every 24 hours HEPA filter of CO2 inlet port can remove impurities and contaminants with efficiency 99.998% @0.2um Standard CO2 cylinder auto changer alerts users and ensures continuous CO2 supply O2 control Maintenance-free zirconuim oxide sensor - long life, good linearity and high precision Oxide sensor is calibrated automatically (auto-cal) and stays in the incubator during the 90℃ decontamination routine Well designed O2/N2 inlet module improves humidity stability in chamber Constant humidity Larger water surface area provide by water reservoir with inclined and rounded corners A new water level alarm(audible and visible) alerts users when the water reservoir needs to be refilled Standard humidity sensor ensures a constant high level of humidity to prevent cultures from drying out User friendly interface Microprocessor with soft-touch control panel for optimum operation Large-size TFT-LCD display for temperature, CO2, O2 concentration and RH Comprehensive visual and audio alarms for all parameters Diagnostic interface provide comprehensive solutions to frequently encountered problems RS232 port standard for communication and external instrument logging Contamination prevention 90℃ disinfection routine decontaminates the entire interior of the chamber while causes less damage to electronic components In independent tests, a routine disinfection circle is proven to completely eliminate a variety of contaminants including mycoplasma A completely smooth inner casing with rounded corner reduces the possibility of hidden contamination Easy-removable, replaceable shelves make chamber cleaning a rapid and efficient process

HF 90

HF 90 HF90 is an air jacketed, direct heat CO2 incubator, with 90 ℃ moist heat decontamination system Key Points - Preventive contamination control - 90℃ decontamination system - Superior usability and convenient - Precise CO2 control and immediate recovery Optimum temperature control A reliable air jacketed heating system combined with PT1000 temperature sensors ensures high precision with homogenous heat distribution in the interior. Outstanding dynamics ensure short recovery times and balance out any fluctuations caused by door open for Heal Force CO2 incubators. This provide reliable protection at any time, particularly for sensitive cultures. Humidity guarantee & Condensation-free The high air humidity prevents cell cultures from drying out and also keeps the osmolarity constant in the culture medium. With our CO2 incubators, you can work with air humidity up to 95% while the interal walls remain completely dry ( In order to prevent contamination, however, no condensation must occur). The patented tilted water reservoir system keeps the air humidity absolutely stable. Good air quality All gas injection lines are filtered via HEPA filter to remove impurities and contaminants before being injected into the chamber. The HEPA filter is able to filter particles larger than 0.3μm at 99.998%. Easy-to-clean design The cleaning process is significantly simplified by Heal Force's unique, seamless, deep-drawn interior chamber, which reduces any areas where contamination could accumulate. Heal Force incubators offer the best usable-space-to-volume ratio due to the total absence of any additional fittings in the interior chamber Divided, inner glass door Three inner glass doors (HF90) maintains stable climatic conditions, minimizes any changes to the humidity, heat and gas concentration, shortens recovery times significantly and also further reduces the risk of contamination. This makes it possible for several users to work with the same equipment Safe for cultivation Cell cultivation in particular is a highly sensitive process in which bacteria, viruses, fungal spores and mycoplasmas can destroy valuable cultures or distort test results, causing more work. Heal Force solves this problem using a unique design and effective method to ensure sterile conditions. HF90 is equipped with 90℃ moist heat disinfection system. The validated overnight sterilization cycle ensures reliable destruction of germs that could interfere with your work and requires no extra work, such as removal of interior fittings. Mycoplasma is 100% eliminated in a routine disinfection cycle.

HF 240

HF 240 HF 240 (240 liters interior capacity) is a direct heat, air jacketed CO2 incubator, with 90℃ moist heat decontamination system Key Points - 90℃ decontamination system - Completely safe for cell culture - Environmental improvement with high precision - Precise CO2 control and immediate recovery Optimum temperature control A reliable air jacketed heating system combined with PT1000 temperature sensors ensures high precision with homogenous heat distribution in the interior. Outstanding dynamics ensure short recovery times and balance out any fluctuations caused by door open for Heal Force CO2 incubators. This provide reliable protection at any time, particularly for sensitive cultures. Humidity guarantee & Condensation-free The high air humidity prevents cell cultures from drying out and also keeps the osmolarity constant in the culture medium. With our CO2 incubators, you can work with air humidity up to 95% while the interal walls remain completely dry ( In order to prevent contamination, however, no condensation must occur). The patented tilted water reservoir system keeps the air humidity absolutely stable. Good air quality All gas injection lines are filtered via HEPA filter to remove impurities and contaminants before being injected into the chamber. The HEPA filter is able to filter particles larger than 0.3μm at 99.998%. Easy-to-clean design The cleaning process is significantly simplified by Heal Force's unique, seamless, deep-drawn interior chamber, which reduces any areas where contamination could accumulate. Heal Force incubators offer the best usable-space-to-volume ratio due to the total absence of any additional fittings in the interior chamber Divided, inner glass door Six half-size sealed inner glass doors (HF240) maintain stable climatic conditions, minimizes any changes to the humidity, heat and gas concentration, shortens recovery times significantly and also further reduces the risk of contamination. This makes it possible for several users to work with the same equipment Safe for cultivation Cell cultivation in particular is a highly sensitive process in which bacteria, viruses, fungal spores and mycoplasmas can destroy valuable cultures or distort test results, causing more work. Heal Force solves this problem using a unique design and effective method to ensure sterile conditions. HF240 is equipped with 90℃ moist heat disinfection system. The validated overnight sterilization cycle ensures reliable destruction of germs that could interfere with your work and requires no extra work, such as removal of interior fittings. Mycoplasma is 100% eliminated in a routine disinfection cycle.

HF151UV

HF151UV HF151UV is an air jacketed, direct heat CO2 incubator, with UV decontamination system Key Points - 151L interior capacity - Preventive contamination control - UV decontamination system - Precise CO2 control and immediate recovery Unique design and effective method to ensure sterile conditions. Long-life ultraviolet lamp maintains contamination-free conditions within the chamber. Offer the best usable-space-to-volume ratio due to total absence of any additional fittings in the interior chamber. Filtered via HEPA filter, able to filter particles larger than 0.3um at 99.998%. Absolutely condensation-free, even at high air humidity level. Outstanding dynamics ensure short recovery times and balance out any fluctuations caused by door open. Auto-start function.

HF 212UV

HF 212UV HF212UV is an air jacketed, direct heat CO2 incubator, with UV decontamination system Key Points - 212L interior capacity - Preventive contamination control - UV decontamination system - Precise CO2 control and immediate recovery Unique design and effective method to ensure sterile conditions. Long-life ultraviolet lamp maintains contamination-free conditions within the chamber. Offer the best usable-space-to-volume ratio due to total absence of any additional fittings in the interior chamber. Filtered via HEPA filter, able to filter particles larger than 0.3um at 99.998%. Absolutely condensation-free, even at high air humidity level. Outstanding dynamics ensure short recovery times and balance out any fluctuations caused by door open. Auto-start function.

HF 160W

HF 160W HF160W is a water jacketed CO2 incubator, with HEPA filtration system Key Points - 185L interior capacity - HEPA filter to guarantee Class 100 air quality - AUTO-ZERO/AUTO-START function - Humidity display and alarm system Water-jacketed The large size Heal Force HF160W CO2 incubator incorporates a water jecketed system. Because of the heat retention characteristics of water, there is no sudden temperature change in the event of an unexpected power failure. A stable temperature enviroment is ensured. HEPA filter HF160W applies long term effectiveness of the HEPA filter to protect your cultures. The filter is very efficient to entrap particulates larger than 0.3μm at 99.97%. The HEPA filter system runs continuously and within every 60 seconds, the volume of entire chamber is disinfected. With help of HEPA filter, the air quality achieves Class 100 clean room levels within 5 minutes following a door opening. Airflow system Optimized air flow system ensures the temperature and CO2 concentration to be stable and uniform within the chamber. AUTO-ZERO/AUTO-START HF160W combines precise CO2 control with a choice of TC or IR sensors. The microprocessor will automatically "Zero" the incubator(IR type) using room air as a reference every 24 hours. Auto-start function for TC type ensures the sensor's beseline automatically reset without manual adjustment. These features will maintain an accurate CO2 control without worrying about CO2 drift. Humidity display and alarming system HF160W is able to create a high humidity environment and the relative humidity (RH) is displayed on the panel, readable in 0.1% increments, including low RH programmable alarm(alerts you of need to add water)