The TT-200 Viscometer is flange mounted for use on mixing/blending/storage tanks or in pipe lines using a "T" fitting. The viscosity measurement range and operating shear rate are designed with Brookfield's assistance to suit specific applications such as the 511 sec-1 required by the API standards.

The standard viscometer has a single speed/single shear rate drive. Optionally available with a variable speed motor for variable shear rate requirements or pilot plant applications involving different materials with a broad range of viscosities.

• Defined shear means agreement with Brookfield Laboratory measurements at equivalent shear rates
• Shear Rates 10-1,000 sec^-1
• Capable of pressures up to 500 psi (34 bar) and temperatures up to 500°F (260°C)
• Continuous measurement eliminates need for "Grab" sampling and allows for prediction and constant control of final product properties
• Concentric cylinders provide defined shear measurement
• 4-20mA output signal provides a variety of display and control capabilities
• Flange mountable directly into tank or in pipeline tee
• Can be operated at shear rates of 511 sec^-1 for American Petroleum Institute (API) measurement needs
• Rugged 300 series s/s construction
• Repeatable to ±.5% of full scale range
• Available with explosion proof class 1, Div. 1 and 2, Group D design
• Optional 12V or 24V DC operation

• Flange 4″ or larger, ASA 150#, 300# or 600#
• Wetted parts are stainless steel type 316
• Pressure rating of 200 (14 bar) or 500 (35 bar) psi
• Minimum viscosity 15 cP (mPa·s)
• Maximum viscosity 200,000 cP (mPa·s)
• Electrical code NEMA 4 (water and dust tight for indoor or outdoor use) or NEMA 7 (explosion proof)
• Input power: 115 Vac, 230 Vac, 24 Vdc

• Nema 7 configuration