Illuminating/viewing system

Reflectance: d:8° (diffuse illumination/8° viewing angle), capable of simultaneous SCI (di:8° specular component included)/SCE (de:8° specular component excluded) measurement. Conforms to CIE No. 15, ISO 7724/1, ASTM E-1164, DIN 5033 Teil 7, and JIS Z8722 Condition C standards.
Transmittance: d:0° (diffuse illumination/0° viewing angle). Conforms to CIE No. 15, ASTM E-1164, DIN 5033 Teil 7 standards

Detector

Dual 40-element silicon photodiode arrays

Spectral separation device

Diffraction grating

Wavelength range

360 to 740 nm

Wavelength pitch

10 nm

Half bandwidth

Approx. 10 nm

Photometric range

0 to 200%; Display resolution: 0.01%

Sphere size

Ø 152 mm

Light source

Four pulsed xenon lamps

Measurement time

Approximately 1.5 seconds (until data output)

Minimum interval between measurements

Approx. 4 seconds when SCI/SCE measured

Measurement/illumination areas

Reflectance: Changeable between LAV, MAV, and SAV
LAV: Ø 25.4 mm/Ø 30 mm
MAV: Ø 8 mm/Ø11 mm
SAV: Ø 4 mm/Ø 7 mm
Transmittance: Approx. Ø 22 mm

Repeatability

Spectral reflectance: Standard deviation within 0.1%
Colorimetric values: Standard deviation within ΔE*ab 0.02

Inter instrument agreement

Mean ΔE*ab 0.15 (LAV/SCI) Average for 12 BCRA Series II color tiles compared to values measured with master body

Temperature dependence

Spectral reflectance: Within ± 0.10%/°C
Color difference: Within ΔE*ab 0.05/°C

UV adjustment

Instantaneous numerical adjustment

UV cut filters

400 nm cutoff and 420 nm cutoff

Transmittance chamber

Width: 133 mm, Depth: Approx. 50 mm; Measurement diameter: Approx. 17 mm
Transmission sample holder (optional accessory): Sample holder; for both plate-shaped and liquid samples (removable)

Interface

RS-232C, D-sub 9-pin (female) terminal

Power

AC 100V - 240V 50/60Hz (using included AC adapter)

Operating temperature/humidity range

13 - 33°C, relative humidity 80% or less (at 33°C) with no condensation

Storage temperature/humidity range

0 - 40°C, relative humidity 80% or less (at 33°C) with no condensation

Dimensions (W × H × D)

CM-3600d: 244 × 208 × 378 mm
CM-3610d: 300 × 597 × 315 mm

Weight

CM-3600d: 12 kg
CM-3610d: 16.5 kg

Standard accessories

White Calibration Plate, Target Mask (Ø 4 mm), Target Mask (Ø 8 mm), Target Mask (Ø 25.4 mm), Zero Calibration Box, AC Adapter, Dust Cover, Accessory Case, Unit Driver, RS-232C Cable (9-pin, 2 m)

Optional accessories

Color Data Software PaperControl, NX Color Data Software SpectraMagic™ NX, Transmittance Specimen Holder, Glass Cell (2 mm)/(10 mm)/(20 mm), Plastic Cell (2 mm)/(10 mm)/(20 mm), Transmittance Zero Calibration Plate, RS-232C Cable IF-A13 (5 m)