GFL

Distile Su Cihazi

Gfl Water Still - Double Distillation Water Still 2102

Specifications and features       Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting. Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details"). Electronic level control during the whole distilling process. Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator 1st stage, the red pilot lamp "Clean" will glow. Double-action low water cut-off through float switch and thermostatic safety switch. Economical energy consumption by distillation of the heated cooling water. Water saving through automatic water cut-off. Unnecessary water consumption will be avoided. Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of borosilicate glass. Evaporator easily accessible for cleaning purposes . Distillate withdrawal: valve made of borosilicate glass with teflon plunger for single distillate, outlet with dust shield made of borosilicate glass for double distillate. CO2 degassing through outlet in the condenser. Heating element and evaporator made of stainless steel. Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin. Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm). Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm). Hoses for water in- and outlet are available as accessory. Applications       GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 2 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 72 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 500 x 260 x 470 mm Electrical connection 230 V / 50...60 Hz / 3.5 kW ** Net weight approx. 18.0 kgs Gross weight (cardboard box) approx. 26.0 kgs Gross weight (wooden case) approx. 30.0 kgs Packing volume approx. 0.26 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water. Bidistile Grubu Su Cihazlari : Bu üniteler hem masaüstü hem de duvara monte edilebilen modellerdir.Isitici element ve evaporatör paslanmaz çelikten mamuldür. GFL Model 2102     2 lt/saat kapasiteli GFL Model 2104     4 lt/saat kapasiteli GFL Model 2108     8 lt/saat kapasiteli

Gfl Water Still - Double Distillation Water Still 2104

Specifications and features         Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting. Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details"). Electronic level control during the whole distilling process. Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator 1st stage, the red pilot lamp "Clean" will glow. Double-action low water cut-off through float switch and thermostatic safety switch. Economical energy consumption by distillation of the heated cooling water. Water saving through automatic water cut-off. Unnecessary water consumption will be avoided. Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of borosilicate glass. Evaporator easily accessible for cleaning purposes. Distillate withdrawal: valve made of borosilicate glass with teflon plunger for single distillate, outlet with dust shield made of borosilicate glass for double distillate. CO2 degassing through outlet in the condenser. Heating element and evaporator made of stainless steel. Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin. Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm). Main switch with pilot lamp for the monitoring of both distillation stages at the front of the unit. Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm). Hoses for water in- and outlet are available as accessory.  Applications         GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 4 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 120 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 550 x 280 x 570 mm Electrical connection 400 V / 50...60 Hz / 6.5 3 Ph/N/PE three-phase current ** Net weight approx. 23.0 kgs Gross weight (cardboard box) approx. 35.0 kgs Gross weight (wooden case) approx. 45.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Double Distillation Water Still 2108

Specifications and features            Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.   Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process.  Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Double-action low water cut-off through float switch and thermostatic safety switch.  Economical energy consumption by distillation of the heated cooling water.   Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of borosilicate glass.  Evaporator easily accessible for cleaning purposes.  Distillate withdrawal: valve made of borosilicate glass with teflon plunger for single distillate, outlet with dust shield made of borosilicate glass for double distillate.  CO2 degassing through outlet in the condenser.  Heating element and evaporator made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 8 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 198 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 700 x 390 x 700 mm Electrical connection 400 V / 50...60 Hz / 11.5 kW 3 PH/N/PE three-phase current ** Net weight approx. 39.0 kgs Gross weight (cardboard box) approx. 55.0 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.56 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single & Double Distilation 2202

Specifications and features            Glass Water Still for single distillation (fully automatic), suitable for both bench and wall mounting.   Very good distillate quality; conductivity single distillate: approx. 2.2 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process. Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.  Water level control in the boiler automatically switches off the power in case of water shortage.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Sterillisation of the condensers by steam.  Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.  Quartz sheated heating elements.  Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.  Distillate withdrawal through hose connection at the right-hand site.  CO2 degassing through outlet in the condenser.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 2 l / h Conductivity approx. 2.2 µs / cm at 20 °C * Cooling water required approx. 48 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 200 x 390 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW ** Net weight approx. 16.0 kgs Gross weight (cardboard box) approx. 22.0 kgs Gross weight (wooden case) approx. 30.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water. Cam üniteli Mono ve Bidistile Su Cihazlari : Bu modellerde evaporatör ve kondenser üniteleri borosilikat camdan mamuldür. GFL Model 2202      2 lt/saat kapasiteli mono-distile modeli GFL Model 2204      4 lt/saat kapasiteli mono-distile modeli GFL Model 2208      8 lt/saat kapasiteli mono-distile modeli GFL Model 2302      2 lt/saat kapasiteli bi-distile modeli GFL Model 2304      4 lt/saat kapasiteli bi-distile modeli

Gfl Water Still - Single & Double Distilation 2204

Specifications and features  Glass Water Still for single distillation (fully automatic), suitable for both bench and wall mounting.   Very good distillate quality; conductivity single distillate: approx. 2.2 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process.  Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.  Water level control in the boiler automatically switches off the power in case of water shortage.  Economical energy consumption by distillation of the heated cooling water.   Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Sterillisation of the condensers by steam.  Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.  Quartz sheated heating elements.  Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.  Distillate withdrawal through hose connection at the right-hand site.  CO2 degassing through outlet in the condenser.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 4 l / h Conductivity approx. 2.2 µs / cm at 20 °C * Cooling water required approx. 96 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 200 x 390 mm Electrical connection 230 V / 50...60 Hz / 3.0 kW ** Net weight approx. 17.0 kgs Gross weight (cardboard box) approx. 22.0 kgs Gross weight (wooden case) approx. 30.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single & Double Distilation 2208

Specifications and features           Glass Water Still for single distillation (fully automatic), suitable for both bench and wall mounting.   Very good distillate quality; conductivity single distillate: approx. 2.2 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process.  Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.  Water level control in the boiler automatically switches off the power in case of water shortage.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Sterillisation of the condensers by steam.  Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.  Quartz sheated heating elements.  Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.  Distillate withdrawal through hose connection at the right-hand site.  CO2 degassing through outlet in the condenser.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).  Power supply through included mains cable (without plug).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 8 l / h Conductivity approx. 2.2 µs / cm at 20 °C * Cooling water required approx. 144 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 365 x 390 mm Electrical connection 400 V / 50...60 Hz / 6.0 kW 3 Ph/N/PE three-phase current ** Net weight approx. 24.0 kgs Gross weight (cardboard box) approx. 30.0 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single & Double Distilation 2302

Specifications and features           Glass Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.   Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details").   Electronic level control during the whole distilling process.   Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.   Water level control in the boiler automatically switches off the power in case of water shortage.   Economical energy consumption by distillation of the heated cooling water.   Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.   Sterillisation of the condensers by steam.   Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.   Quartz sheated heating elements.   Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.   Distillate withdrawal through hose connection at the right-hand site.   CO2 degassing through outlet in the condenser.   Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.   Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).   Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).   Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 2 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 96 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 365 x 390 mm Electrical connection 230 V / 50...60 Hz / 2.9 kW ** Net weight approx. 24.0 kgs Gross weight (cardboard box) approx. 30.5 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single & Double Distilation 2304

Specifications and features Glass Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.   Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C double distillate: approx. 1.6 µs/cm at 25 °C (see "Technical Details").  Electronic level control during the whole distilling process.  Electronic impurity detector effects rinsing and cleaning of the evaporator by automatic water change.  Water level control in the boiler automatically switches off the power in case of water shortage.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Sterillisation of the condensers by steam.  Visible distillation process due to the easily removable, unbreakable front screen which does not steam up.  Quartz sheated heating elements.  Evaporator, condenser and overflow are made of borosilicate glass. Condenser with dribble guard.  Distillate withdrawal through hose connection at the right-hand site.  CO2 degassing through outlet in the condenser.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 1/2 inch (inner- ø approx. 12.7 mm).  Power supply through included mains cable (without plug).  Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. Technical details Capacity 4 l / h Conductivity Single distillate: approx. 2.2 µs / cm at 20 °C Double distillate: approx. 1.6 µs / cm at 20 °C * Cooling water required approx. 144 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 650 x 365 x 390 mm Electrical connection 400 V / 50...60 Hz / 5.8 kW 3 PH/N/PE three-phase current ** Net weight approx. 24.0 kgs Gross weight (cardboard box) approx. 31.5 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single Distillation Water Still 2002

Specifications and features        Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.   Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  The distillate storage tank accepts twice the hourly capacity of the still.  Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.  Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Evaporator easily accessible for cleaning purposes.  Condenser (cooling coil) inside the storage tank, easily exchangeable.  Distillate withdrawal through drain cock with continuous and touch position.  CO2 degassing through outlet in the condenser.  Heating element, evaporator, storage tank and condenser made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory.        Applications   GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications.   Technical details Capacity 2 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Storage tank capacity 4 l Cooling water required approx. 30 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 540 x 290 x 420 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW ** Net weight approx. 15.4 kgs Gross weight (cardboard box) approx. 18.5 kgs Gross weight (wooden case) approx. 30. kgs Packing volume approx. 0.16 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water. Mono-Distile Grubu Cihazlari   ( Depolama tank üniteli modeller ) : GFL Model 2002     2 lt/saat kapasiteli , 4 lt depolama tank üniteli GFL Model 2004     4 lt/saat kapasiteli , 8 lt depolama tank üniteli GFL Model 2008     8 lt/saat kapasiteli , 16 lt depolama tank üniteli GFL Model 2012     12 lt/saat kapasiteli , 24 lt depolama tank üniteli

Gfl Water Still - Single Distillation Water Still 2004

Specifications and features          Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.   Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  The distillate storage tank accepts twice the hourly capacity of the still.  Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.  Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Evaporator easily accessible for cleaning purposes.  Condenser (cooling coil) inside the storage tank, easily exchangeable.  Distillate withdrawal through drain cock with continuous and touch position.  CO2 degassing through outlet in the condenser.  Heating element, evaporator, storage tank and condenser made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 4 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Storage tank capacity 8 l Cooling water required approx. 48 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 620 x 330 x 460 mm Electrical connection 230 V / 50...60 Hz / 3.0 kW ** Net weight approx. 20.2 kgs Gross weight (cardboard box) approx. 24.0 kgs Gross weight (wooden case) approx. 35.0 kgs Packing volume approx. 0.16 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single Distillation Water Still 2008

Specifications and features           Power supply through included mains cable (without plug).   Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.  Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  The distillate storage tank accepts twice the hourly capacity of the still.  Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn. Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Evaporator easily accessible for cleaning purposes .  Condenser (cooling coil) inside the storage tank, easily exchangeable.  Distillate withdrawal through drain cock with continuous and touch position.  CO2 degassing through outlet in the condenser.  Heating element, evaporator, storage tank and condenser made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.  Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 8 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Storage tank capacity 16 l Cooling water required approx. 72 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 780 x 410 x 540 mm Electrical connection 400 V / 50...60 Hz / 6.0 kW 3 Ph/N/PE three-phase-current ** Net weight approx. 30.7 kgs Gross weight (cardboard box) approx. 41.0 kgs Gross weight (wooden case) approx. 50.0 kgs Packing volume approx. 0.34 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single Distillation Water Still 2012

Specifications and features  Power supply through included mains cable (without plug).   Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.  Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  The distillate storage tank accepts twice the hourly capacity of the still.  Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.  Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.  Evaporator easily accessible for cleaning purposes .  Condenser (cooling coil) inside the storage tank, easily exchangeable.  Distillate withdrawal through drain cock with continuous and touch position.  CO2 degassing through outlet in the condenser.  Heating element, evaporator, storage tank and condenser made of stainless steel.  Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin. Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).  Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 12 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Storage tank capacity 24 l Cooling water required approx. 198 l / h Minimum water pressure 3 bar to max. 7 bar Exterior dimensions (W x D x H) 780 x 410 x 670 mm Electrical connection 400 V / 50...60 Hz / 9.0 kW 3 Ph/N/PE three-phase-current ** Net weight approx. 43.0 kgs Gross weight (cardboard box) approx. 47.0 kgs Gross weight (wooden case) approx. 70.0 kgs Packing volume approx. 0.48 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.

Gfl Water Still - Single Water Still 2001-2

Specifications and features  Water Still for single distillation suitable for bench mounting.  Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Evaporator easily accessible for cleaning purposes .  Destillate withdrawal through outlet at the condenser.  CO2 degassing through outlet in the condenser.   Cooling water temperature indicated through a thermometer.  Heating element, evaporator and condenser made of stainless steel.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Cooling water in- and outlet 1/2" (ø approx. 12.7 mm).  Hoses for water in- and outlet are available as accessory.  Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 2 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Cooling water required approx. 20 l / h Minimum water pressure 1 to 2 bar Exterior dimensions (W x D x H) 280 x 250 x 490 mm Electrical connection 230 V / 50...60 Hz / 2.0 kW ** Net weight approx. 7.5 kgs Gross weight (cardboard box) approx. 10.0 kgs Gross weight (wooden case) approx. 22.0 kgs Packing volume approx. 0.10 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water. ** other voltages on request Mono-Distile Grubu Cihazlari   ( Depolama tanki içermeyen modeller ) :  Bakim-gerektirmeyen,güvenilir, kullanimi kolay,masaüstü ve de depolama tanki içermeyen mono-distile kalitesinde su üreten su cihazlaridir.CE belgelidir. GFL Model 2001/2     2 lt/saat kapasiteli GFL Model 2004/4   4 lt/saat kapasiteli

Gfl Water Still - Single Water Still 2001-4

Specifications and features           Water Still for single distillation suitable for bench mounting.   Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").  Thermostatic low water cut-off.  Economical energy consumption by distillation of the heated cooling water.  Evaporator easily accessible for cleaning purposes.  Destillate withdrawal through outlet at the condenser.  CO2 degassing through outlet in the condenser.  Cooling water temperature indicated through a thermometer.  Heating element, evaporator and condenser made of stainless steel.  Outer housing made of electrolytically galvanised sheet steel, electrostatically powder coated with epoxy resin.  Cooling water in- and outlet 1/2" (ø approx. 12.7 mm).  Hoses for water in- and outlet are available as accessory. Applications            GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications. Technical details Capacity 4 l / h Conductivity approx. 2.3 µs / cm at 20 °C * Cooling water required approx. 40 l / h Minimum water pressure 1 to 2 bar Exterior dimensions (W x D x H) 280 x 250 x 490 mm Electrical connection 230 V / 50...60 Hz / 3.0 kW ** Net weight approx. 7.5 kgs Gross weight (cardboard box) approx. 10.0 kgs Gross weight (wooden case) approx. 22.0 kgs Packing volume approx. 0.10 m3 * Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.