GFL

Su Banyosu

Gfl Water Bath - Incubation Inactivation Bath 1002

Specifications and features  Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath.  Applications            The Water Bath is successfully used for incubations and inactivations of cultures, such as e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples. Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 7 l Interior dimensions (W x D x working height) 245 x 200 x 145 mm Exterior dimensions (W x D x H) 325 x 395 x 255 mm Electrical connection 230 V / 50...60 Hz / 1.0 kW * Net / gross weight approx. 8.0 / 10.5 kgs Packing volume approx. 0.11 m3       * other voltages and frequencies on request Inkübasyon / Inaktivasyon Banyolari : GFL Model 1002                kapasite : 7 lt     GFL Model 1003                kapasite :14 lt   GFL Model 1004                kapasite :21 lt   GFL Model 1005                kapasite :40 lt   GFL Model 1008                kapasite :20 lt   GFL Model 1012                kapasite : 7 lt ; sirkülasyon sistemli   GFL Model 1013                kapasite :14 lt ; sirkülasyon sistemli

Gfl Water Bath - Incubation Inactivation Bath 1003

Specifications and features Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.   Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples. Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 14 l Interior dimensions (W x D x working height) 400 x 245 x 145 mm Exterior dimensions (W x D x H) 485 x 440 x 255 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 12.0 / 15.0 kgs Packing volume approx. 0.13 m3 * other voltages and frequencies on request  

Gfl Water Bath - Incubation Inactivation Bath 1004

Specifications and features Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples, as well as for heating up medical compresses/hot packs. Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 21 l Interior dimensions (W x D x working height) 600 x 245 x 145 mm Exterior dimensions (W x D x H) 685 x 440 x 255 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 15.0 / 21.0 kgs Packing volume approx. 0.26 m3 * other voltages and frequencies on request

Gfl Water Bath - Incubation Inactivation Bath 1008

Specifications and features  Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 20 l Interior dimensions (W x D x working height) 400 x 245 x 205 mm Exterior dimensions (W x D x H) 485 x 440 x 315 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 13.0 / 16.0 kgs Packing volume approx. 0.13 m3 * other voltages and frequencies on request

Gfl Water Bath - Incubation Inactivation Bath 1013

Specifications and features  Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Excellent temperature uniformity in the whole bath through built-in circulation system.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel, Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated. Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +99.9 °C Capacity approx. 14 l Interior dimensions (W x D x working height) 400 x 245 x 145 mm Exterior dimensions (W x D x H) 485 x 440 x 315 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 12.0 / 16.0 kgs Packing volume approx. 0.13 m3 * other voltages and frequencies on request

Gfl Water Bath - Multiple Water Bath 1041

Specifications and features           Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  The openings in the lid are covered by heat-resistant plastic 6-part ring sets.  Bath interior, heating element, frame with openings and 2-part perforated floor plate above the heating element are made of stainless steel.  Housing made of electrolytically galvanised sheet steel, powder-coated.  Adjustable water level regulator 1919 available as a standard scope of supply. Applications            Especially suitable when particular requirements to quality and quantity have to be met, e. g. for gentle multiple steaming work from columns, Erlenmeyer flasks or beakers.  Technical details   Temperature range approx. 5 °C above ambient temperature to +99.9 °C Openings with sets of rings 4 ø of the openings 130 mm Working height 90 mm Exterior dimensions (W x D x H) 682 x 232 x 190 mm Electrical connection 230 V / 50...60 Hz / 1.0 kW * Net / gross weight approx. 12.0 / 15.0 kgs Packing volume approx. 0.12 m3 * other voltages and frequencies on request  

Gfl Water Bath - Multiple Water Bath 1042

Specifications and features  Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  The openings in the lid are covered by heat-resistant plastic 6-part ring sets.  Housing made of electrolytically galvanised sheet steel, powder-coated.  Bath interior, heating element, frame with openings and 2-part perforated floor plate above the heating element are made of stainless steel.  Adjustable water level regulator 1919 available as a standard scope of supply. Applications            Especially suitable when particular requirements to quality and quantity have to be met, e. g. for gentle multiple steaming work from columns, Erlenmeyer flasks or beakers.   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Openings with sets of rings 6 ø of the openings 130 mm Working height 90 mm Exterior dimensions (W x D x H) 982 x 232 x 190 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 16.0 / 20.0 kgs Packing volume approx. 0.15 m3 * other voltages and frequencies on request

Gfl Water Bath - Tissue Float Bath 1052

Specifications and features  Very good temperature constancy of ± 0.5 °C.   Exact temperature control guarantees evenly stretched cut tissues which are clearly visible in the bath.  Careful drying of the cut tissues on the warmed rim of the bath. The low 100 mm height of the bath allows compfortable and safe working.  Bath interior made of aluminium, black anodised.  Housing made of aluminium, powder-coated.  With temperature controller and scale, main switch and two pilot lamps.  Control thermometer fixed to the rim of the bath. Applications            This special bath is preferably used for stretching and drying cut tissues in histological, pathological, chemical, clinical and bacteriological laboratories.   Technical details Temperature range approx. 5 °C above ambient temperature to +80 °C Interior dimensions ø / H mm 200/60 Overall dimensions ø / H mm 280/100 Electrical connection 230 V / 50...60 Hz / 0.3 kW * Net / gross weight approx. 2.0 / 5.0 kgs Packing volume approx. 0.03 m3 * other voltages and frequencies on request GFL Model 1052 Organ Banyosu  : Kesili dokularin dikkatli bir sekilde kurutulmasi için özel olarak üretilmis modeldir. Histoloji,patoloji,kimya,klinik ve bakteriyolojik laboratuarlarinda kullanima uygundur.  

Gfl Water Bath - Water Bath for Evaporation 1023

Specifications and features  Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  Removable square cover plate (W 265 mm x D 265 mm).  9-part ring set made of heat-resistant plastic. The diametre of the opening can be varied in approx. 20 mm steps.  Heating element, bath interior, frame and perforated floor above the heating element are made of stainless steel.  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  The adjustable water level regulator 1919 as well as the 9-part ring set are included in the standard scope of supply. Applications            For gentle steaming work with Erlenmeyer flasks and beakers.   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Capacity approx. 7 l ø of the openings min. 45.5 / max. 194.0 mm Interior dimensions (W x D x working height) 240 x 240 x 120 mm Exterior dimensions (W x D x H) 342 x 342 x 180 mm Electrical connection 230 V / 50...60 Hz / 1.0 kW * Net / gross weight approx. 9.0 / 12.0 kgs Packing volume approx. 0.10 m3 * other voltages and frequencies on request   GFL Model 1023 Evaporasyon Banyosu : Erlen flasklar veya beherlerde evaporasyon islemi için uygun ring sistemli kapakli olup, 7 lt kapasitede ve de sicaklik ayari ortam sicakliginin 5 C üzeri ile 99.9 C arasinda ayarlanabilmektedir.

Gfl Water Bath - Water Baths for Fume Hood 1031

Specifications and features   Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  The openings in the lid are covered by heat-resistant plastic 4-part ring sets.  Bath interior, heating element, removable recessed lid and perforated floor cover above the heating element are made of stainless steel. Adjustable water level regulator 1919 available as a standard scope of supply.  Four non-slip plastic feet ensure best stability. Applications            For gentle steaming work with Erlenmeyer flasks, beakers, etc. This special bath is also preferred for the protected use in fume hoods (digestories).   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Openings with sets of rings 6 ø of the openings 90 mm Working height 100 mm Exterior dimensions (W x D x H) 430 x 300 x 155 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 6.1 / 7.4 kgs Packing volume approx. 0.05 m3 * other voltages and frequencies on request     Çekerocak için özel Banyolar : GFL Model 1031     6 ring sistemli banyo GFL Model 1032     8 ring sistemli banyo  

Gfl Water Bath - Water Baths for Fume Hood 1032

Specifications and features          Temperature control by tension thermostat.   Protection of the heating element by over-temperature cut-out.  The openings in the lid are covered by heat-resistant plastic 4-part ring sets. Bath interior, heating element, removable recessed lid and perforated floor cover above the heating element are made of stainless steel. Adjustable water level regulator 1919 available as a standard scope of supply.  Four non-slip plastic feet ensure best stability. Applications            For gentle steaming work with Erlenmeyer flasks, beakers, etc. This special bath is also preferred for the protected use in fume hoods (digestories).   Technical details Temperature range approx. 5 °C above ambient temperature to +99.9 °C Openings with sets of rings 6 ø of the openings 90 mm Working height 100 mm Exterior dimensions (W x D x H) 430 x 300 x 155 mm Electrical connection 230 V / 50...60 Hz / 1.5 kW * Net / gross weight approx. 6.1 / 7.4 kgs Packing volume approx. 0.05 m3 * other voltages and frequencies on request

Gfl Water Bath - Incubation Inactivation Bath 1005

Specifications and features  The Water Bath is especially made to heat up medical compresses and hot packs.   Microprocessor-controlled temperature regulation.  Excellent temperature constancy: ± 0.1 °C temporal.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections. Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Cover and perforated tray included as standard scope of supply. Water bath 1005 is supplied without perforated tray when ordered with rack 1923 (accessory).  Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for heating up medical compresses/hot packs as well as for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples. Technical details approx. 5 °C above ambient temperature to +99.9 °C approx. 3 °C above tap water temperatur to +99.9 °C approx. 40 l 410 x 296 x 325 mm 495 x 490 x 445 mm 230 V / 50...60 Hz / 1.5 kW * approx. 21.0 / 28.0 kgs approx. 0.30 m3

Gfl Water Bath - Incubation Inactivation Bath 1012

Specifications and features          Microprocessor-controlled temperature regulation.   Excellent temperature constancy: ± 0.1 °C temporal.  Excellent temperature uniformity in the whole bath through built-in circulation system.  Digital temperature readout and setting via LED display, in steps of 0.1 °C.  Soft touch keys with characteristic symbols.  Electronic monitoring; in case of fault, cause is reported on display.  Two independently working over-temperature protections.  Heating element, bath interior, cover, lid and perforated tray made of stainless steel,  Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.  Lid and perforated tray included as standard scope of supply. Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.  Drain cock at the back of the bath. Applications            The Water Bath is successfully used for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.   Technical details approx. 5 °C above ambient temperature to +99.9 °C approx. 3 °C above tap water temperatur to +99.9 °C approx. 7 l 245 x 200 x 145 mm 325 x 395 x 315 mm 230 V / 50...60 Hz / 1.0 kW * approx. 8.0 / 12.0 kgs approx. 0.11 m3