HELLMA | Fiber Optik Prob | Hellma Fibre Optic Probe-Standard Immersion Probe

HELLMA | Fiber Optik Prob | Hellma Fibre Optic Probe-Standard Immersion Probe

Orjinal Link : Ürün Sayfasına Git
Dosya :

HELLMA

Fiber Optik Prob

Hellma Fibre Optic Probe-Standard Immersion Probe

Standard Immersion Probe
Hellma standard immersion probes are ideally suited to laboratory measurements. As with conventional cell measurements, the collimated light beam passes through the solution only once. The use of a prism very low values for stray light.

The measuring head is made of SUPRASIL® 300 quartz and secured into the stainless steel top section with a FFKM-O-Ring.The removable metal sleeve protects the immersion probe from damage and reduces the amount of incoming ambient light.

Product info 661.000

Catalogue Number	661.000
Probe head material	Quartz SUPRASIL^® 300
Probe barrel material	Stainless steel 1.4404 (316 L)
Protective sleeve material	Stainless steel 1.4404 (316 L) /1.4571 (316 Ti)
Probe head seal	FFPM
Protective sleeve seal	FPM
Outside Ø probe head	15 mm
Outside Ø probe shaft	20 mm
Outside Ø probe barrel	18 mm
Outside Ø protective sleeve	20 mm
Total length	approx. 180 mm (10 mm light path)
Max. immersion depth	100 mm (10 mm light path)
Light path	1 mm, 2 mm, 5 mm, 10 mm, 20 mm
Typ. transmission	UV/Vis approx. 40% in air above 300 nm NIR approx. 40% in air above 400 nm
Max. pressure	6 bar
Max. temperature	150 °C
Fibre-optic cables	Not included, available separately for UV/Vis and NIR ranges (see chapter 3.3.1 and 3.3.3).

Etiketler : Ankyralab HELLMA Fiber Optik Prob Hellma Fibre Optic Probe-Standard Immersion Probe, Laboratory Devices, Laboratory Equipments, Laboratory Tools, Ankyra Laboratory Tools, Ankyralab Laboratory Devices, Ankyralab Laboratory Systems